CLAAS DISCO 3450 PLUS DISCO 3050 3050 PLUS DISCO 3050 C PLUS DISCO 2650 2650 PLUS DISCO 2650 C PLUS Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
CLAAS DISCO 3450 PLUS DISCO 3050 3050 PLUS DISCO 3050 C PLUS DISCO 2650 2650 PLUS DISCO 2650 C PLUS Operator’s Manual – PDF DOWNLOAD
INTRODUCTION
- This operator’s manual is the original operator’s manual. Hereafter, it is referred to simply as the operator’s manual. This operator’s manual contains information on the use, adjustment and operation of the mower unit.
- The advice on care and maintenance should be followed in order to ensure that the machine is always ready for operation and will have a long service life. Also, have assembly of your machine and regular inspections carried out by your specialist
- workshop. Failure to carry out maintenance work, or incorrect operation will result in poor machine efficiency and loss of valuable time. Make use of the experience and latest knowledge embodied in this machine by operating and maintaining it properly, then your cutting mechanism, mower unit will always produce good results.
TABLE OF CONTENTS:
CLAAS DISCO 3450 PLUS DISCO 3050 3050 PLUS DISCO 3050 C PLUS DISCO 2650 2650 PLUS DISCO 2650 C PLUS Operator’s Manual – PDF DOWNLOAD
1. Introduction
Introduction
VALIDITY
3. Preface
Of special importance
Identification plate 1. Introduction
Introduction
VALIDITY
3. Preface
Of special importance
Identification plate
4. Safety Rules
Identification of warning and danger signs …………. 4.1
Designated use ……………………………………………… 4.1
Avoidable incorrect applications ………………………. 4.2
General safety and accident prevention
regulations ……………………………………………………. 4.2
Attached machines ………………………………………… 4.3
Trailed machines ……………………………………………. 4.4
PTO operation ……………………………………………….. 4.4
Hydraulic system ……………………………………………. 4.4
Tyres ……………………………………………………………. 4.5
Maintenance …………………………………………………. 4.5
Sound pressure level ……………………………………… 4.5
De-commissioning and disposal ………………………. 4.6
Safety decals with pictorials …………………………….. 4.7
5. Specifications
Specifications ………………………………………………… 5.1
Axial loading, minimum ballast and total weight
calculation …………………………………………………….. 5.1
Noise pressure level of the disc mowers DISCO
3450 / 3050 / 3050 C / 2650 / 2650 C …………… 5.5
6. Prior to operation
Loading / unloading the machine DISCO
3450 / 3050 / 3050 C / 2650 / 2650 C ……………….. 6.1
Check and observe the following before putting into
operation! ……………………………………………………… 6.2
Attachment to the tractor …………………………………. 6.3
Adjusting the hitch ……………………………………… 6.3
Adjust universal drive shaft …………………………. 6.5
Fitting the universal drive shaft ……………………. 6.5
Universal drive shaft – conditioner ………………… 6.7
Hydraulics ………………………………………………… 6.7
Stand ……………………………………………………….. 6.9
Fitting the machine ……………………………………….. 6.10
Prior to transportation …………………………………… 6.11
Driving on public roads …………………………….. 6.14
Identification of the machine for road traffic …. 6.14
7. Operation
Operation ……………………………………………………… 7.1
Working position ……………………………………….. 7.1
Safety devices …………………………………………… 7.3
Transport position ……………………………………… 7.3
Setting the cutting height ……………………………. 7.4
Collision protection …………………………………….. 7.5
Mowing …………………………………………………….. 7.6
Recommendations for environmental
protection …………………………………………………. 7.9
Suspension springs ………………………………….. 7.11
Swath device
Right hand swath disc ………………………………. 7.12
Left hand swath disc
(Optional equipment
DISCO 2650 Plus / 2650) …………………………. 7.14
Left hand swath disc
(Optional equipment
DISCO 3050 Plus / 3050) …………………………. 7.16
Conditioner
DISCO 3050 C / 2650 C …………………………… 7.16
Swath plates
DISCO 3050 C / 2650 C …………………………… 7.17
Wide distribution hood
(Optional equipment DISCO 3050 C Plus /
2650 C Plus) …………………………………………… 7.17
Additional equipment …………………………………….. 7.18
High cutting runners B03 0020 ………………….. 7.18
Additional runners C03 0030 …………………….. 7.18
Collision protection and safety frame
S03 0070 ………………………………………………… 7.18
Left hand swath disc G03 0020 …………………. 7.18
Left hand swath plate G03 0030 ………………… 7.19
Changeover kit for PTO speed 1000 rpm
P09 0010 ………………………………………………… 7.19
Wide distribution hood G03 0010 ……………….. 7.20
Slip yoke kit M03 0010 ……………………………… 7.20
Slip yoke kit M03 0020 ……………………………… 7.20
Hydraulic connecting parts for
tractor R03/0010 ……………………………………… 7.20
Lighting adapter (USA, R03/0500) ……………… 7.21
8. Maintenance
Important maintenance instructions ………………….. 8.1
Hydraulic system ……………………………………….. 8.1
Energy accumulators …………………………………. 8.1
Bolts ………………………………………………………… 8.1
Lubrication ……………………………………………….. 8.1
Safety device (safety frame) ……………………….. 8.2
Drive systems ………………………………………………… 8.3
Tensioning the drive belts …………………………… 8.3
Conditioner gearbox …………………………………… 8.6
Mower head ……………………………………………… 8.7
Knife sections ………………………………………………… 8.9
Knife section box ……………………………………… 8.10
Changing the cutting knives ………………………. 8.11
Blade replacement DISCO 3050 / 2650 ………. 8.17
Mower discs ………………………………………………… 8.19
Replacing cutting discs …………………………….. 8.19
Mower head suspension ……………………………….. 8.21
Conditioner tines ………………………………………….. 8.23
Fitting/removing tines ……………………………….. 8.23
Table of contents
2.2 BA DISCO 3450 / 3050 / 3050 C / 2650 / 2650 C – 00 293 857 6
Table of contents
Universal drive shaft …………………………………….. 8.23
Hydraulic system …………………………………………. 8.24
Hydraulic hose connections ……………………… 8.24
Hydraulic cylinders ………………………………….. 8.24
Connecting elements ……………………………………. 8.25
Screw connections ………………………………………. 8.25
Cleaning and care ……………………………………….. 8.25
Winter storage …………………………………………….. 8.26
Malfunctions ……………………………………………….. 8.26
9. Lubrication chart
Safety rules ………………………………………………….. 9.1
Lubricants …………………………………………………….. 9.1
Lubrication ……………………………………………………. 9.1
4. Safety Rules
Identification of warning and danger signs …………. 4.1
Designated use ……………………………………………… 4.1
Avoidable incorrect applications ………………………. 4.2
General safety and accident prevention
regulations ……………………………………………………. 4.2
Attached machines ………………………………………… 4.3
Trailed machines ……………………………………………. 4.4
PTO operation ……………………………………………….. 4.4
Hydraulic system ……………………………………………. 4.4
Tyres ……………………………………………………………. 4.5
Maintenance …………………………………………………. 4.5
Sound pressure level ……………………………………… 4.5
De-commissioning and disposal ………………………. 4.6
Safety decals with pictorials …………………………….. 4.7
5. Specifications
Specifications ………………………………………………… 5.1
Axial loading, minimum ballast and total weight
calculation …………………………………………………….. 5.1
Noise pressure level of the disc mowers DISCO
3450 / 3050 / 3050 C / 2650 / 2650 C …………… 5.5
6. Prior to operation
Loading / unloading the machine DISCO
3450 / 3050 / 3050 C / 2650 / 2650 C ……………….. 6.1
Check and observe the following before putting into
operation! ……………………………………………………… 6.2
Attachment to the tractor …………………………………. 6.3
Adjusting the hitch ……………………………………… 6.3
Adjust universal drive shaft …………………………. 6.5
Fitting the universal drive shaft ……………………. 6.5
Universal drive shaft – conditioner ………………… 6.7
Hydraulics ………………………………………………… 6.7
Stand ……………………………………………………….. 6.9
Fitting the machine ……………………………………….. 6.10
Prior to transportation …………………………………… 6.11
Driving on public roads …………………………….. 6.14
Identification of the machine for road traffic …. 6.14
7. Operation
Operation ……………………………………………………… 7.1
Working position ……………………………………….. 7.1
Safety devices …………………………………………… 7.3
Transport position ……………………………………… 7.3
Setting the cutting height ……………………………. 7.4
Collision protection …………………………………….. 7.5
Mowing …………………………………………………….. 7.6
Recommendations for environmental
protection …………………………………………………. 7.9
Suspension springs ………………………………….. 7.11
Swath device
Right hand swath disc ………………………………. 7.12
Left hand swath disc
(Optional equipment
DISCO 2650 Plus / 2650) …………………………. 7.14
Left hand swath disc
(Optional equipment
DISCO 3050 Plus / 3050) …………………………. 7.16
Conditioner
DISCO 3050 C / 2650 C …………………………… 7.16
Swath plates
DISCO 3050 C / 2650 C …………………………… 7.17
Wide distribution hood
(Optional equipment DISCO 3050 C Plus /
2650 C Plus) …………………………………………… 7.17
Additional equipment …………………………………….. 7.18
High cutting runners B03 0020 ………………….. 7.18
Additional runners C03 0030 …………………….. 7.18
Collision protection and safety frame
S03 0070 ………………………………………………… 7.18
Left hand swath disc G03 0020 …………………. 7.18
Left hand swath plate G03 0030 ………………… 7.19
Changeover kit for PTO speed 1000 rpm
P09 0010 ………………………………………………… 7.19
Wide distribution hood G03 0010 ……………….. 7.20
Slip yoke kit M03 0010 ……………………………… 7.20
Slip yoke kit M03 0020 ……………………………… 7.20
Hydraulic connecting parts for
tractor R03/0010 ……………………………………… 7.20
Lighting adapter (USA, R03/0500) ……………… 7.21
8. Maintenance
Important maintenance instructions ………………….. 8.1
Hydraulic system ……………………………………….. 8.1
Energy accumulators …………………………………. 8.1
Bolts ………………………………………………………… 8.1
Lubrication ……………………………………………….. 8.1
Safety device (safety frame) ……………………….. 8.2
Drive systems ………………………………………………… 8.3
Tensioning the drive belts …………………………… 8.3
Conditioner gearbox …………………………………… 8.6
Mower head ……………………………………………… 8.7
Knife sections ………………………………………………… 8.9
Knife section box ……………………………………… 8.10
Changing the cutting knives ………………………. 8.11
Blade replacement DISCO 3050 / 2650 ………. 8.17
Mower discs ………………………………………………… 8.19
Replacing cutting discs …………………………….. 8.19
Mower head suspension ……………………………….. 8.21
Conditioner tines ………………………………………….. 8.23
Fitting/removing tines ……………………………….. 8.23
Table of contents
2.2 BA DISCO 3450 / 3050 / 3050 C / 2650 / 2650 C – 00 293 857 6
Table of contents
Universal drive shaft …………………………………….. 8.23
Hydraulic system …………………………………………. 8.24
Hydraulic hose connections ……………………… 8.24
Hydraulic cylinders ………………………………….. 8.24
Connecting elements ……………………………………. 8.25
Screw connections ………………………………………. 8.25
Cleaning and care ……………………………………….. 8.25
Winter storage …………………………………………….. 8.26
Malfunctions ……………………………………………….. 8.26
9. Lubrication chart
Safety rules ………………………………………………….. 9.1
Lubricants …………………………………………………….. 9.1
Lubrication ……………………………………………………. 9.1
IMAGES PREVIEW OF THE MANUAL:
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
S.M