Cat P11, 14 Design A Series Axial Piston Pump, Variable Displacement w/Auxlliary Package Gold cup Service Manual – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Cat P11, 14 Design A Series Axial Piston Pump, Variable Displacement w/Auxlliary Package Gold cup Service Manual – PDF DOWNLOAD
Introduction :
General :
The Denison Hydraulics Goldcup 11 and Goldcup 14 axial piston pumps feature advance design concepts which are time proven and provide for advance pumping and control concepts. The instructions contained in this manual cover complete disassemЫy and reassemЫy of the unit. Before proceeding with the disassemЫy or reassemЫy of any unit, this manual should Ье studied in order to become familiar with proper order and parts nomenclature.
Description :
The use of а rocker cam to control the pump displacement provides а small package size, reduces wear, and speeds control response. The control vane actuator eliminates linkage and backlash inherent in typical stroking cylinder designs. Standard controls for the Goldcup units are Rotary Servo and Compensator Over-Ride. Additional optional controls are also availble.
TABLE OF CONTENTS:
Cat P11, 14 Design A Series Axial Piston Pump, Variable Displacement w/Auxlliary Package Gold cup Service Manual – PDF DOWNLOAD
INTRODUCTION
GENERAL
DESCRIPTION
Т ABLE I CHARACTERISTICS
INSTALLATION
MOUNTING
PIPING
SERVICE INFORMATION
FLUIDS
MAINTENANCE
START UP PROCEDURE
TABLE 11 FLUID CONTAMINATION
TABLE III TROUBLESHOOTING
TABLE IV REWORK LIMITS
DISASSEMBLY
ASSEMBLY PROCEDURES
FIGURE 1 DRIVE SHAFT ASSY.
FIGURE 2 BARREL AND AUX. SHAFТ
F.IGURE 3 ROCKER САМ PISTONS & RET.
FIGURE 4 BARREL & STROКING ASSY. ТО
MOUNTING FLANGE
1 РuЫ S1-AM00S I
CONTENTS
PAGE PAGE
FIGURE 5 HOUSING AND BEARING ASSY. 15
2 FIGURE 6 HOUSING & MOUNTING FLANGE 15
2 FIGURE 7 PORT BLOCK ASSY. 17
2 FIGURE 8 PORT BLOCK ТО HOUSING 17
FIGURE 9 GEROTOR & BARREL HOLD-DOWN 19
FIGURE 10 VALVE BLOCK (BEFORE 7-93) 21
3 FIGURE 11 VALVE BLOCK (AFTER 7-93) 23
3 FIGURE 12 VALVE BLOCK FOR SERVO MTG.
3 (BEFORE 7-93) 26
3 FIGURE 13 VALVE BLOCK FOR SERVO MTG.
4 (AFTER 7-93) 29
4 FIGURE 14 SHAFT & SHAFT SEAL,
COUNTER BALANCE CONTROL &
4 CONTROL COVER ASSEMBLIES 32
5 IMPORT ANT INSTRUCTIONS 35
7 TEST PROCEDURES 37
7 ORDERING CODE 42
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
S.V