Cat Continuous Miner Broadmeadow Belt Tailpiece Operation Manual – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Cat Continuous Miner Broadmeadow Belt Tailpiece Operation Manual – PDF DOWNLOAD
preface:
This manual is intended to provide basic operating information on DBT Belt Tailpiece (BTP) systems. Additional information can be obtained by referring to the Parts Book supplied with your equipment, or by contacting your local DBT representative. The illustrations, descriptions and procedures contained in this manual pertain to the equipment as it was originally manufactured and delivered to your mine, and when the manual was approved for printing. DBT reserves the right to discontinue or revise machine models at any time, or change specifications, designs or procedures, without notice and without incurring obligations.
- The equipment was manufactured under the guidelines, procedures and requirements of the appropriate government regulatory agencies. At the completion of manufacturing, this equipment was issued the appropriate approval numbers and nameplates indicating that it met the technical requirements of the appropriate agencies. Any change to the design or structure of this equipment, without the consent of DBT and these agencies, may void these approvals and render the equipment illegal or dangerous for use.
- Strict compliance with all local and national laws, regulations and practices regarding the safe operation and maintenance of underground mining equipment is necessary to ensure the personal safety of those working on, or around, this machine.
- While this manual attempts to anticipate the most important operations and maintenance needs for this equipment, unforeseen circumstances may arise that have not been addressed in this manual. If any concerns or questions arise, please contact your DBT America Service Representative immediately
TABLE OF CONTENTS:
Cat Continuous Miner Broadmeadow Belt Tailpiece Operation Manual – PDF DOWNLOAD
About this manual 1.1
preface 1.3
about this manual 1.4
before starting work 1.4
right operating manual 1.4
type 1.4
new operating manual 1.4
purpose of manual 1.5
efficiency 1.5
service 1.5
safety 1.5
Your safety 2.1
operating conditions intended use 2.3
safety instructions 2.4
general rules 2.4
protective equipment 2.4
condition 2.4
safety equipment 2.4
emergency equipment 2.4
secure BTP 2.4
block working area 2.4
moving parts 2.4
Storage and transport 3.1
transport safety device 3.3
lifting device 3.3
floor covering device 3.3
TABLE OF CONTENTS
DBT AUSTRALIA – BELT TAILPIECE ©
© DBT AUSTRALIA 2007
Inclined storage 3.3
Environmental acceptability 3.3
Installation 4.1
general operation 4.3
operational problems BTP creep 4.3
maintenance and repair 4.4
protect working area 4.4
working in mine area 4.4
replacing parts 4.4
original parts 4.4
lifting points 4.4
safety equipment 4.4
hydraulics 4.5
handling hydraulic fluids 4.5
maintenance and repair 4.5
permissible hoses 4.5
laying hydraulic hoses 4.6
delivery 4.8
assembly and start-up 4.8
before starting-up 4.8
start-up procedure 4.8
shutdown procedure 4.9
dismantling and removing equipment 4.9
Operation 5.1
moving the BTP 5.5
side slewing the BTP 5.6
crawler mounted belt tailpiece general operation 5.3
start-up procedure 5.3
shutdown procedure 5.4
releasing the restraining device 5.6
frame 5.7
angled type belt wiper (self-adjusting) 5.7
snub pulley (customer supplied) 5.8
tail pulley (customer supplied) 5.9
pinned on hinged skirts (solid steel type) 5.10
underside sliding dolly with trapping shoe 5.11
lubrication system (customer supplied) 5.12
lubrication schedule (crawler mounted belt tailpiece) 5.13
control station 5.14
standard multi-section cylinder control valve bank 5.16
2 function tram valve 5.18
fixed pressure reducer 5.20
fixed over pressure relief 5.21
pilot operated emergency shut-off valve 5.22
fixed flow control valve 5.23
pressure and return connection station 5.24
other hydraulic components 5.25
crawler lift jacks 5.26
side slew (lift and slew) 5.27
idler rollers (customer supplied) 5.29
tramming the crawler—single torque hub (2-wd) type with
brake
5.30
towing and free wheeling—single torque hub (2-wd) type 5.31
tensioning of the crawler pad chains—torque hub type 5.33
crawlers—single torque hub (2-WD) type 5.40
adding, removing or replacing cat pads—torque hub type 5.35
tram motor—2000 series; 11.9 cubic inch 5.37
torque hub—CT45 series; 1:110.07 5.38
Technical data 6.1
Belt tailpiece statistics for kayuga mine 6.3
Addition information and parts 6.5
For your information 7.1
For your information 7.3
VIDEO PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com. We may surprise you with a nice offer
S.V
