Case IH Tractor PUMA 130,145,160 CVT Operator’s Manual
FILE DETAILS:
Case IH Tractor PUMA 130,145,160 CVT Operator’s Manual_84411146
Size : 12.5 MB
Format : PDF
Language : English
Number of Pages : 482 pages
Brand: Case IH
Type of machine: Tractor
Type of document: Operator’s Manual
Model: PUMA 130,145,160 CVT
Part No: 84411146
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
Case IH Tractor PUMA 130,145,160 CVT Operator’s Manual_84411146
TO THE OWNER:
- This Manual has been prepared to assist you in the correct procedure for running- in, driving and operating and for the maintenance of your new tractor. Read this Manual carefully. Your tractor is intended for use in normal and customary agricultural applications.
- If at any time you require advice concerning your tractor, do not hesitate to contact your authorised dealer. He has factory trained personnel, genuine manufacturers’ parts and the necessary equipment to carry out all your service requirements.
- The specification are provided for your information and guidance. For further information concerning your tractor and equipment, consult your authorised dealer. All data given in this manual is subject to production variations. Dimensions and weight are approximate only.
- The illustrations do not necessarily show tractors in standard condition or imply that these features are available in all countries. For exact information about any particular tractor, please consult your authorised dealer. Your tractor has been designed and built to give maximum performance, economy and ease of operation under a wide variety of operating conditions.
- Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition. To maintain this condition and ensure troublefree operation, it is important that the routine services, as specified on page 7-12 of this Manual, are carried out at the recommended intervals.
- OPERATORS MANUAL STORAGE The Operators Manual supplied with your tractor is an important source of information and should be stored safely. The manual is written specifically for your tractor so it is important that you make a note of the print number and issue date which can be found on the cover.
- In the event the manual is lost or damaged it can be replaced with the correct version. A storage pocket for the Operators Manual can be found on the rear of the seat. The manual should be kept in this pocket at all times when not in use.
- ABOUT THIS MANUAL This manual gives information for use of your machine, as intended and under the conditions foreseen by the manufacturer during normal operation and routine service and maintenance. Read and understand; keep it in good condition and always safely store it in the provided pocket in the back of your seat for later easy retrieval.
TABLE OF CONTENTS:
Case IH Tractor PUMA 130,145,160 CVT Operator’s Manual_84411146
1 GENERAL INFORMATION
CE DECLARATION OF CONFORMITY 1-1
METRIC AND IMPERIAL UNITS ABBREVIATIONS 1-3
TO THE OWNER 1-5
PRODUCT IDENTIFICATION1-7
ENGINE IDENTIFICATION 1-8
DRIVELINE IDENTIFICATION 1-9
CAB IDENTIFICATION 1-9
PRODUCT IDENTIFICATION PLATE 1-9
ECOLOGY AND THE ENVIRONMENT 1-10
NOISE LEVEL1-11
PROGRAMMING TRACTOR FUNCTIONS1-11
BEFORE OPERATING THE TRACTOR1-12
INTERNATIONAL SYMBOLS 1-13
VIBRATION LEVEL INFORMATION SHEET 1-14
MACHINE STABILITY 1-15
INSTRUCTOR’S SEAT1-19
SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM 1-20
2 SAFETY INFORMATION
SAFETY DECALS2-1
SAFETY PRECAUTIONS 2-9
BEFORE DRIVING THE TRACTOR 2-10
DRIVING THE TRACTOR2-11
OPERATING THE TRACTOR 2-12
OPERATING THE PTO 2-14
OPERATING THE EXTERNAL CONTROLS 2-14
SERVICING THE TRACTOR 2-15
DIESEL FUEL2-17
PREVENTION OF FIRE OR EXPLOSION 2-18
FIRE EXTINGUISHER2-19
PROTECTION OFFERED BY THE TRACTOR 2-20
INTENDED USE STATEMENT 2-23
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
INTRODUCTION3-1
CAB AIR FILTERS 3-5
IN CAB STORAGE (where fitted) 3-6
CABLE AND WIRING ROUTING 3-7
MOBILE TELEPHONE USAGE3-7
IMPLEMENT MONITOR INSTALLATION 3-8
CAB AIR PRESSURISATION MONITOR (where fitted) 3-8
OPERATOR’S SEAT
AIR SUSPENSION SEAT DELUXE 3-10
SEAT BELT 3-15
INSTRUCTOR’S SEAT
INSTRUCTIONAL SEAT (where fitted)3-16
FORWARD CONTROLS
KEY- START SWITCH 3-17
HAZARD WARNING LIGHT SWITCH 3-17
LIGHT-/ TURN LEVER 3-18
FOLLOW ME HOME LIGHTS 3-18
WINDSHIELD WIPER AND WASHER CONTROLS 3-19
ELECTRONIC PARK BRAKE 3-20
CLUTCH/ INCHING PEDAL 3-24
FOOT BRAKES3-24
EXHAUST BRAKE (where fitted)3-25
STEERING COLUMN3-26
LEFT-HAND SIDE CONTROLS
HANDBRAKE 3-27
RIGHT-HAND SIDE CONTROLS
INTEGRATED CONTROL PANEL 3-28
REARWARD CONTROLS
SWITCH PANEL C- PILLAR 3-29
HYDRAULIC MASTER SWITCH 3-30
HEATED SCREENS (where fitted) 3-31
FAST STEERING SYSTEM (where fitted)3-32
BATTERY ISOLATOR SWITCH 3-34
CLIMATE CONTROLS 3-35
MANUAL TEMPERATURE CONTROL3-36
AUTOMATIC TEMPERATURE CONTROL (ATC) 3-37
OVERHEAD CONTROLS
SWITCH PANEL WORKLIGHTS 3-39
RADIO/CASSETTE/CD PLAYER (where fitted) 3-39
INTERIOR LIGHT 3-40
INSTRUMENT CLUSTER
INTEGRATED CONTROL UNIT 3-41
GAUGES 3-41
INDICATOR AND WARNING LIGHTS 3-42
DISPLAYS3-45
KEYPAD BASIC3-46
KEYPAD ENHANCED3-47
SELECTING OR CHANGING THE DISPLAY SETTINGS 3-49
ADJUST MENU3-50
CONFIGURE MENU 3-52
PERFORMANCE MONITOR 3-56
ARMREST COLOUR DISPLAY 3-60
POP- UP SCREENS ON COLOUR DISPLAY 3-62
PERFORMANCE MONITOR ON COLOUR DISPLAY3-68
PROGRAMMING THE DISPLAYS 3-71
ALARM FUNCTIONS3-74
ACCESSING STORED ERROR CODES 3-76
WARNING AND ADVISORY SYMBOLS 3-77
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
TRACTOR REFUELLING4-1
STARTING THE UNIT
STARTING THE ENGINE4-3
GRID HEATER COLD START AID (where fitted)4-4
FUEL HEATER (where fitted) 4-4
COOLANT IMMERSION HEATER (where fitted)4-5
TRANSMISSION OIL HEATER (where fitted) 4-6
BOOSTING THE BATTERY 4-7
STOPPING THE UNIT
STOPPING THE ENGINE4-8
AUTOMATIC ENGINE SHUTDOWN 4-8
AUTOMATIC ENGINE SHUTDOWN WITH ENHANCED KEYPAD (where fitted)4-9
MOVING THE UNIT
OPERATING IN COLD TEMPERATURES4-10
REVERSIBLE ENGINE FAN 4-11
5 TRANSPORT OPERATIONS
PREPARING FOR ROAD TRANSPORT
CARRYING THE TRACTOR ON A TRANSPORTER 5-1
SECURE THE HIGH VISIBILITY ROOF PANEL 5-1
RECOVERY TRANSPORT
TOWING THE TRACTOR5-2
6 WORKING OPERATIONS
GENERAL INFORMATION
VARIABLE ENGINE POWER MANAGEMENT 6-1
CONSTANT ENGINE SPEED 6-3
DIFFERENTIAL LOCK6-6
FOUR WHEEL DRIVE6-8
FRONT AXLE SUSPENSION (where fitted) 6-10
AUTOMATED HEADLAND FUNCTIONS6-11
QUICK GUIDE 6-11
RECORDING AND RE-PLAYING6-13
EXPLANATION OF SYMBOLS 6-16
RECORDING A SEQUENCE 6-17
RE-PLAYING A SEQUENCE 6-22
DELETING A SEQUENCE 6-26
TRANSMISSION
TRANSMISSION OPERATION 6-27
DRIVE PEDAL6-27
ENGINE SPEED CONTROL 6-28
SHUTTLE LEVER6-30
SPEED MATCHING 6-31
TRANSMISSION CONTROLS 6-32
PROGRAMME THE MAXIMUM SPEED 6-34
STATIONARY CONTROL 6-35
ANTI JACK KNIFE 6-36
TRANSMISSION DISPLAY 6-37
MANUAL MODE 6-38
AUTOMATIC MODE6-39
ERROR CODES 6-40
REAR POWER TAKE-OFF
PTO OPERATING PRECAUTIONS 6-41
CHANGING THE PTO OUTPUT SHAFT 6-41
ATTACHING PTO DRIVEN EQUIPMENT 6-42
PTO OPERATION 6-43
THREE-SPEED PTO SYSTEM6-48
GROUND DRIVE PTO (where fitted)6-49
EXTERNAL PTO CONTROLS 6-50
AUTO PTO OPERATION6-52
FRONT POWER TAKE OFF
PTO OPERATION 6-55
AUTO PTO OPERATION6-57
REAR HITCH
ELECTRONIC DRAFT CONTROL 6-59
SETTINGS AND DISPLAY6-63
ELECTRONIC DRAFT CONTROL OPERATION 6-65
EXTERNAL HITCH CONTROLS6-71
FRONT HITCH
SETTINGS AND ADJUSTMENTS 6-73
HITCH OPERATION6-76
AUXILIARY FRONT COUPLERS (where fitted) 6-81
EXTERNAL HITCH CONTROLS6-83
HYDRAULIC REMOTE CONTROL VALVES
REMOTE CONTROL VALVES 6-84
OPERATING WITH REMOTE VALVES 6-86
CONNECTING REMOTE CYLINDERS 6-90
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT 6-92
ELECTRO-HYDRAULIC REMOTE CONTROL VALVES (where fitted)
REMOTE CONTROL VALVES 6-94
SETTINGS AND ADJUSTMENTS6-101
SETTING THE REMOTE VALVE PRIORITY 6-107
CREATING TIMER PROGRAMMES 6-109
CONNECTING REMOTE CYLINDERS 6-116
OPERATING WITH REMOTE VALVES 6-118
JOYSTICK OPERATION WITH A FRONT LOADER 6-120
MID MOUNT REMOTE VALVES 6-122
EXTERNAL EHR CONTROLS 6-124
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT 6-125
HYDRAULIC POWER BEYOND PORT
HYDRAULIC POWER BEYOND FOR EXTERNAL SERVICES6-127
THREE POINT HITCH
ATTACHING THREE-POINT HITCH EQUIPMENT 6-130
LIFT ROD ADJUSTMENT 6-132
TOP LINK ADJUSTMENT6-134
FLEXIBLE LINK END ADJUSTMENT 6-135
QUICK HITCH6-136
LINKAGE STABILISER ADJUSTMENT 6-138
DRAWBARS AND TOWING ATTACHMENTS
DRAWBARS AND TOWING ATTACHMENTS6-141
SWINGING DRAWBARS6-144
AUTOMATIC PICK-UP HITCH 6-147
REAR TOW HITCH6-149
TRAILER BRAKING SYSTEMS
AIR-OPERATED TRAILER BRAKES6-155
AIR-OPERATED TRAILER BRAKES (Italy only)6-158
TRAILER BRAKE BIAS CONTROL 6-159
AUXILIARY AIR SUPPLY CONNECTOR (where fitted) 6-159
HYDRAULIC TRAILER BRAKES 6-160
HYDRAULIC TRAILER BRAKES (Italy only) 6-161
WHEEL TRACK ADJUSTMENT
FRONT WHEEL TRACK ADJUSTMENT 6-162
FRONT WHEEL ALIGNMENT 6-165
STEERING STOPS6-166
FRONT AXLE OSCILLATION STOPS 6-166
FRONT FENDER 6-167
REAR WHEEL TRACK ADJUSTMENT6-169
FLANGE TYPE AXLE (where fitted) 6-169
BAR TYPE AXLE (where fitted)6-172
BALLASTING AND TYRES
BALLASTING AND TYRES 6-176
IRON WEIGHTS (where fitted) 6-179
LIQUID BALLAST 6-182
TYRE INFLATION 6-184
TYRE PRESSURES AND PERMISSIBLE LOADS 6-185
AUXILIARY POWER CONNECTIONS
DIAGNOSTIC SOCKET 6-187
TRAILER SOCKET ELECTRICAL6-187
ELECTRICAL POWER CONNECTORS 6-188
INTERNAL POWER CONNECTORS6-188
EXTERNAL POWER CONNECTORS 6-190
7 MAINTENANCE
GENERAL INFORMATION
INTRODUCTION7-1
FUEL REQUIREMENT7-2
BIODIESEL FUEL 7-4
ENGINE OIL CHANGE7-5
PROTECTIVE DEVICES 7-6
LUBRICANTS AND COOLANTS Lubrications and Coolants7-8
General specification 7-10
CAPACITIES7-11
MAINTENANCE CHART
Maintenance Chart7-12
WHEN THE WARNING LAMP LIGHTS
CHANGE THE ENGINE AIR CLEANER OUTER ELEMENT 7-14
DRAIN FUEL SYSTEM WATER SEPARATOR 7-15
CHECK BRAKE FLUID LEVEL 7-16
EVERY 10 HOURS OR EACH DAY
CHECK ENGINE COOLANT LEVEL7-17
CHECK ENGINE OIL LEVEL 7-18
CHECK REMOTE CONTROL VALVE DRAIN BOTTLES7-18
CHECK WINDSCREEN WASHER RESERVOIR 7-19
DRAIN AIR RESERVOIR ON AIR OPERATED TRAILER BRAKE 7-19
FIRST 50 HOURS
SERVICE OPERATIONS7-20
EVERY 50 HOURS
CLEAN THE CAB AIR FILTER7-21
CLEAN THE COOLER SECTION7-23
ALL GREASE FITTINGS7-24
CHECK FRONT AND REAR WHEEL NUTS7-30
CHECK TYRE PRESSURES AND TYRE CONDITION 7-30
EVERY 100 HOURS
INSPECT POLY V-BELT7-31
INSPECT COMPRESSOR DRIVE BELT 7-31
EVERY 300 HOURS
CHECK BATTERY FLUID LEVEL7-32
ADJUST HANDBRAKE 7-33
CHECK TRANSMISSION/REAR AXLE AND HYDRAULIC OIL LEVEL7-34
CHECK 4WD FRONT AXLE DIFFERENTIAL AND HUBS OIL LEVEL 7-35
CHECK FRONT PTO GEARBOX OIL LEVEL 7-35
EVERY 600 HOURS
CHANGE ENGINE OIL AND FILTER 7-36
CHANGE FUEL PRE-FILTER AND FUEL FILTER ELEMENT7-38
CHANGE THE ENGINE AIR CLEANER OUTER ELEMENT 7-39
CHANGE CHARGE PUMP AND GEAR PUMP OIL FILTER 7-40
CHECK ENGINE AIR INTAKE CONNECTIONS7-41
CHECK TRANSMISSION OIL COOLER PIPE COUPLINGS 7-42
CLEAN DEF/ AdBlue INLINE FILTER 7-42
EVERY 1200 HOURS OR ANNUALLY
CHANGE CAB AIR FILTERS 7-43
CHANGE MAIN OIL FILTER CARTRIDGE 7-44
CHANGE TRANSMISSION/ REAR AXLE AND HYDRAULIC OIL 7-45
CHANGE 4WD DIFFERENTIAL OIL7-46
CHANGE 4WD PLANETARY HUB OIL7-47
CHANGE FRONT PTO GEARBOX OIL 7-47
EVERY 1200 HOURS OR EVERY 2 YEARS
CHECK BATTERY FLUID LEVEL7-48
CHANGE DEF/ AdBlue INLINE FILTER 7-49
CHANGE ENGINE AIR CLEANER INNER ELEMENT 7-50
CHANGE ENGINE BREATHER FILTER 7-51
CHECK VALVE TAPPET CLEARANCE7-51
CHANGE ENGINE COOLANT FLUID 7-52
CHANGE AIR BRAKE DRIER RESERVOIR 7-56
CHANGE POLY V-BELTS 7-57
EVERY 3600 HOURS OR EVERY 2 YEARS
CHANGE DEF/ AdBlue MAIN FILTER 7-59
EVERY 36 MONTHS
SERVICE THE AIR CONDITIONER SYSTEM 7-60
CHECK BATTERY FLUID LEVEL7-61
GENERAL MAINTENANCE
CLEANING THE TRACTOR 7-63
FUEL SYSTEM PRE- FILTER AND WATER TRAP7-65
BLEEDING THE FUEL INJECTION SYSTEM 7-65
CHECK BRAKE PEDAL LATCHING/UNLATCHING 7-66
ADJUST CAB SUSPENSION (where fitted) 7-67
ADJUST AUTOMATICK PICK- UP HITCH7-68
HEADLIGHT AND WORKLAMP ADJUSTMENT 7-69
BULB REPLACEMENT 7-70
FUSES AND RELAYS7-74
PROTECTING THE ELECTRONIC AND ELECTRICAL SYSTEMS DURING BATTERY
CHARGING OR WELDING7-79
BATTERY REMOVAL AND INSTALLATION 7-80
STORAGE
TRACTOR STORAGE 7-81
PREPARATION FOR USE AFTER STORAGE7-81
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
INTRODUCTION 8-1
ALARM(S)
FAULT CODES AND SYMBOLS8-2
SYMPTOM(S)
ENGINE 8-4
TRANSMISSION 8-5
HYDRAULICS 8-5
THREE POINT HITCH 8-6
BRAKES8-6
CAB 8-7
ELECTRICAL SYSTEM8-7
9 SPECIFICATIONS
GENERAL DIMENSIONS 9-1
MAXIMUM OPERATING ANGLE 9-4
TYPICAL OPERATING WEIGHTS 9-5
CAPACITIES 9-6
ENGINE 9-7
FUEL SYSTEM9-7
AIR CLEANER SYSTEM 9-8
COOLING SYSTEM 9-8
TRANSMISSION 9-8
REAR POWER TAKE-OFF 9-9
FRONT POWER TAKE OFF 9-9
HYDRAULIC SYSTEM9-10
THREE POINT HITCH9-10
REMOTE CONTROL VALVES 9-12
THREE POINT HITCH FRONT9-12
FRONT REMOTE VALVE COUPLERS 9-12
BRAKES 9-13
STEERING9-13
ELECTRICAL EQUIPMENT9-14
MINIMUM HARDWARE TIGHTENING TORQUES 9-15
10 ACCESSORIES
EXTERNAL REAR VIEW MIRRORS10-1
AUXILIARY HEADLIGHTS 10-1
11 FORMS AND DECLARATIONS
Service record 1st 50 hour, Owner copy11-1
Service record 1st 50 hour, Dealer copy11-3
INDEX DETAILS:
Case IH Tractor PUMA 130,145,160 CVT Operator’s Manual_84411146
ACCESS TO OPERATOR’S PLATFORM 3-1
CAB AIR FILTERS 3-5
CAB AIR PRESSURISATION MONITOR (where fitted) 3-8
CABLE AND WIRING ROUTING3-7
IMPLEMENT MONITOR INSTALLATION 3-8
IN CAB STORAGE (where fitted)3-6
INTRODUCTION3-1
MOBILE TELEPHONE USAGE 3-7
ACCESSORIES10-1
AUXILIARY HEADLIGHTS 10-3
EXTERNAL REAR VIEW MIRRORS10-1
FRONT- END LOADER FIXATION POINTS10-5
RADIO (where fitted)10-1
ROTATING BEACON 10-4
ALARM(S) 8-2
FAULT CODES AND SYMBOLS 8-2
AUXILIARY POWER CONNECTIONS6-207
DIAGNOSTIC SOCKET6-207
ELECTRICAL POWER CONNECTORS6-208
EXTERNAL POWER CONNECTORS6-210
INTERNAL POWER CONNECTORS 6-208
TRAILER SOCKET ELECTRICAL 6-207
BALLASTING AND TYRES 6-196
BALLASTING AND TYRES 6-196
IRON WEIGHTS (where fitted)6-199
LIQUID BALLAST 6-202
TYRE INFLATION 6-204
TYRE PRESSURES AND PERMISSIBLE LOADS 6-205
COMMISSIONING THE UNIT4-1
TRACTOR REFUELLING 4-1
CONTROLS/INSTRUMENTS 3-1
ACCESSING STORED ERROR CODES3-78
ADJUST MENU3-52
AIR SUSPENSION SEAT DELUXE 3-10
ALARM FUNCTIONS 3-76
ARMREST COLOUR DISPLAY 3-62
AUTOMATIC TEMPERATURE CONTROL (ATC) 3-37
BATTERY ISOLATOR SWITCH3-34
CAB AIR FILTERS 3-5
CAB AIR PRESSURISATION MONITOR (where fitted) 3-8
CABLE AND WIRING ROUTING3-7
CLIMATE CONTROLS3-35
CLUTCH/ INCHING PEDAL 3-24
CONFIGURE MENU3-54
DISPLAYS 3-45
ELECTRONIC PARK BRAKE3-20
EXHAUST BRAKE (where fitted) 3-25
FAST STEERING SYSTEM (where fitted) 3-32
FOLLOW ME HOME LIGHTS3-18
FOOT BRAKES3-24
GAUGES3-41
HANDBRAKE3-27
HAZARD WARNING LIGHT SWITCH 3-17
HEATED SCREENS (where fitted)3-31
HYDRAULIC MASTER SWITCH 3-30
IMPLEMENT MONITOR INSTALLATION 3-8
IN CAB STORAGE (where fitted)3-6
INDICATOR AND WARNING LIGHTS 3-42
INSTRUCTIONAL SEAT (where fitted)3-16
INTEGRATED CONTROL PANEL3-28
INTEGRATED CONTROL UNIT3-41
INTERIOR LIGHT3-40
INTRODUCTION3-1
KEY- START SWITCH3-17
KEYPAD BASIC3-48
KEYPAD ENHANCED 3-49
LIGHT-/ TURN LEVER3-18
MANUAL TEMPERATURE CONTROL3-36
MOBILE TELEPHONE USAGE 3-7
PERFORMANCE MONITOR 3-57
PERFORMANCE MONITOR ON COLOUR DISPLAY 3-70
POP- UP SCREENS ON COLOUR DISPLAY3-64
PROGRAMMING THE DISPLAYS3-73
SEAT BELT3-15
SELECTING OR CHANGING THE DISPLAY SETTINGS3-51
STEERING COLUMN 3-26
SWITCH PANEL WORKLIGHTS 3-39
SWITCHES ON C-PILLAR 3-29
TRANSMISSION DISPLAY3-46
WARNING AND ADVISORY SYMBOLS 3-79
WINDSHIELD WIPER AND WASHER CONTROLS 3-19
DRAWBARS AND TOWING ATTACHMENTS6-167
DRAWBARS AND TOWING ATTACHMENTS 6-167
SWINGING DRAWBARS 6-170
ELECTRO-HYDRAULIC REMOTE CONTROL VALVES (where fitted) 6-119
CONNECTING REMOTE CYLINDERS 6-141
CREATING TIMER PROGRAMMES 6-134
EXTERNAL EHR CONTROLS6-150
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-151
JOYSTICK OPERATION WITH A FRONT LOADER6-145
MID MOUNT REMOTE VALVES 6-148
OPERATING WITH REMOTE VALVES 6-143
REMOTE CONTROL VALVES6-119
SETTING THE REMOTE VALVE PRIORITY6-132
SETTINGS AND ADJUSTMENTS 6-126
EVERY 10 HOURS OR EACH DAY 7-18
CHECK ENGINE COOLANT LEVEL7-18
CHECK ENGINE OIL LEVEL7-19
CHECK REMOTE CONTROL VALVE DRAIN BOTTLES 7-19
CHECK WINDSCREEN WASHER RESERVOIR 7-20
DRAIN AIR RESERVOIR ON AIR OPERATED TRAILER BRAKE 7-20
EVERY 100 HOURS 7-34
INSPECT COMPRESSOR DRIVE BELT 7-34
INSPECT POLY V-BELT7-34
EVERY 1200 HOURS OR ANNUALLY7-46
CHANGE 4WD DIFFERENTIAL OIL7-49
CHANGE 4WD PLANETARY HUB OIL7-50
CHANGE CAB AIR FILTERS 7-46
CHANGE FRONT PTO GEARBOX OIL7-50
CHANGE MAIN OIL FILTER CARTRIDGE 7-47
CHANGE TRANSMISSION/ REAR AXLE AND HYDRAULIC OIL 7-48
GREASE REAR AXLE SHAFT BEARING 7-51
EVERY 1200 HOURS OR EVERY 2 YEARS7-52
CHANGE AIR BRAKE DRIER RESERVOIR 7-60
CHANGE DEF/ AdBlue INLINE FILTER 7-53
CHANGE ENGINE AIR CLEANER INNER ELEMENT 7-54
CHANGE ENGINE COOLANT FLUID 7-56
CHANGE POLY V-BELTS 7-61
CHECK BATTERY FLUID LEVEL 7-52
CHECK VALVE TAPPET CLEARANCE7-55
EVERY 1800 HOURS OR EVERY 2 YEARS7-63
CHANGE ENGINE BREATHER FILTER 7-63
EVERY 300 HOURS 7-35
ADJUST HANDBRAKE 7-36
CHECK 4WD FRONT AXLE DIFFERENTIAL AND HUBS OIL LEVEL 7-38
CHECK BATTERY FLUID LEVEL 7-35
CHECK FRONT PTO GEARBOX OIL LEVEL 7-38
CHECK TRANSMISSION/REAR AXLE AND HYDRAULIC OIL LEVEL7-37
EVERY 36 MONTHS 7-65
CHECK BATTERY FLUID LEVEL 7-66
SERVICE AIR CONDITIONER SYSTEM7-65
EVERY 3600 HOURS OR EVERY 2 YEARS7-64
CHANGE DEF/ AdBlue MAIN FILTER 7-64
EVERY 50 HOURS7-23
ALL GREASE FITTINGS7-26
CHECK FRONT AND REAR WHEEL NUTS 7-33
CHECK TYRE PRESSURES AND TYRE CONDITION7-33
CLEAN CAB AIR FILTER7-23
CLEAN COOLER SECTION 7-25
CLEAN SCR COVER AIR DUCTS7-24
EVERY 600 HOURS 7-39
CHANGE CHARGE PUMP OIL FILTER 7-43
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT 7-42
CHANGE ENGINE OIL AND FILTER7-39
CHANGE FUEL PRE-FILTER AND FUEL FILTER ELEMENT7-41
CHECK ENGINE AIR INTAKE CONNECTIONS7-44
CHECK TRANSMISSION OIL COOLER PIPE COUPLINGS 7-45
CLEAN DEF/ AdBlue INLINE FILTER 7-45
FAULT CODE RESOLUTION 8-1
INTRODUCTION8-1
FIRST 50 HOURS7-21
SERVICE OPERATIONS7-21
FORMS AND DECLARATIONS11-1
Service record 1st 50 hour, Dealer copy 11-3
Service record 1st 50 hour, Owner copy 11-1
FORWARD CONTROLS 3-17
CLUTCH/ INCHING PEDAL 3-24
ELECTRONIC PARK BRAKE3-20
EXHAUST BRAKE (where fitted) 3-25
FOLLOW ME HOME LIGHTS3-18
FOOT BRAKES3-24
HAZARD WARNING LIGHT SWITCH 3-17
KEY- START SWITCH3-17
LIGHT-/ TURN LEVER3-18
STEERING COLUMN 3-26
WINDSHIELD WIPER AND WASHER CONTROLS 3-19
FRONT HITCH 6-98
AUXILIARY FRONT COUPLERS (where fitted)6-106
EXTERNAL HITCH CONTROLS6-108
HITCH OPERATION 6-101
SETTINGS AND ADJUSTMENTS6-98
FRONT POWER TAKE OFF 6-80
AUTO PTO OPERATION 6-82
PTO OPERATION 6-80
GENERAL INFORMATION 1-1
BEFORE OPERATING THE TRACTOR 1-11
CAB IDENTIFICATION 1-8
DRIVELINE IDENTIFICATION1-7
ECOLOGY AND THE ENVIRONMENT 1-9
ENGINE IDENTIFICATION 1-6
INSTRUCTOR’S SEAT1-17
INTERNATIONAL SYMBOLS1-12
MACHINE STABILITY 1-13
METRIC AND IMPERIAL UNITS ABBREVIATIONS1-1
PRODUCT IDENTIFICATION 1-5
PROGRAMMING TRACTOR FUNCTIONS1-10
SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM 1-18
TO THE OWNER1-3
GENERAL INFORMATION 6-1
AUTOMATED HEADLAND FUNCTIONS6-11
CONSTANT ENGINE SPEED 6-3
DELETING A SEQUENCE WITH COLOUR DISPLAY 6-26
DIFFERENTIAL LOCK 6-6
EXPLANATION OF SYMBOLS 6-13
FOUR WHEEL DRIVE 6-8
FRONT AXLE SUSPENSION (where fitted)6-10
HEADLAND FUNCTION AND COLOUR DISPLAY SCREENS6-23
QUICK GUIDE 6-11
RE-PLAYING A SEQUENCE 6-19
RECORDING A SEQUENCE6-17
RECORDING AND RE-PLAYING 6-14
VARIABLE ENGINE POWER MANAGEMENT6-1
GENERAL INFORMATION 7-1
BIODIESEL FUEL – Biodiesel fuels7-4
CAPACITIES 7-12
ENGINE OIL CHANGE 7-5
FUEL REQUIREMENT 7-2
GENERAL SPECIFICATIONS7-11
INTRODUCTION7-1
LUBRICANTS AND COOLANTS7-9
PROTECTIVE DEVICES 7-7
TRACTOR JACKING POINTS 7-11
GENERAL MAINTENANCE7-68
ADJUST CAB SUSPENSION (where fitted)7-72
BATTERY REMOVAL AND INSTALLATION7-84
BLEEDING FUEL INJECTION SYSTEM 7-70
BULB REPLACEMENT 7-74
CHECK BRAKE PEDAL LATCHING/UNLATCHING 7-71
CLEANING THE TRACTOR 7-68
FUEL SYSTEM PRE- FILTER AND WATER TRAP7-70
FUSES AND RELAYS 7-78
HEADLIGHT AND WORKLAMP ADJUSTMENT7-73
PROTECTING ELECTRONIC AND ELECTRICAL SYSTEMS DURING BATTERY CHARGING OR
WELDING 7-83
HYDRAULIC POWER BEYOND PORT 6-153
HYDRAULIC POWER BEYOND FOR EXTERNAL SERVICES6-153
HYDRAULIC REMOTE CONTROL VALVES 6-109
CONNECTING REMOTE CYLINDERS 6-115
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-117
OPERATING WITH REMOTE VALVES 6-112
REMOTE CONTROL VALVES6-109
INSTRUCTOR’S SEAT 3-16
INSTRUCTIONAL SEAT (where fitted)3-16
INSTRUMENT CLUSTER3-41
ACCESSING STORED ERROR CODES3-78
ADJUST MENU3-52
ALARM FUNCTIONS 3-76
ARMREST COLOUR DISPLAY 3-62
CONFIGURE MENU3-54
DISPLAYS 3-45
GAUGES3-41
INDICATOR AND WARNING LIGHTS 3-42
INTEGRATED CONTROL UNIT3-41
KEYPAD BASIC3-48
KEYPAD ENHANCED 3-49
PERFORMANCE MONITOR 3-57
PERFORMANCE MONITOR ON COLOUR DISPLAY 3-70
POP- UP SCREENS ON COLOUR DISPLAY3-64
PROGRAMMING THE DISPLAYS3-73
SELECTING OR CHANGING THE DISPLAY SETTINGS3-51
TRANSMISSION DISPLAY3-46
WARNING AND ADVISORY SYMBOLS 3-79
LEFT-HAND SIDE CONTROLS 3-27
HANDBRAKE3-27
MAINTENANCE 7-1
ADJUST CAB SUSPENSION (where fitted)7-72
ADJUST HANDBRAKE 7-36
ALL GREASE FITTINGS7-26
BATTERY REMOVAL AND INSTALLATION7-84
BIODIESEL FUEL – Biodiesel fuels7-4
BLEEDING FUEL INJECTION SYSTEM 7-70
BULB REPLACEMENT 7-74
CAPACITIES 7-12
CHANGE 4WD DIFFERENTIAL OIL7-49
CHANGE 4WD PLANETARY HUB OIL7-50
CHANGE AIR BRAKE DRIER RESERVOIR 7-60
CHANGE CAB AIR FILTERS 7-46
CHANGE CHARGE PUMP OIL FILTER 7-43
CHANGE DEF/ AdBlue INLINE FILTER 7-53
CHANGE DEF/ AdBlue MAIN FILTER 7-64
CHANGE ENGINE AIR CLEANER INNER ELEMENT 7-54
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT 7-15
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT 7-42
CHANGE ENGINE BREATHER FILTER 7-63
CHANGE ENGINE COOLANT FLUID 7-56
CHANGE ENGINE OIL AND FILTER7-39
CHANGE FRONT PTO GEARBOX OIL7-50
CHANGE FUEL PRE-FILTER AND FUEL FILTER ELEMENT7-41
CHANGE MAIN OIL FILTER CARTRIDGE 7-47
CHANGE POLY V-BELTS 7-61
CHANGE TRANSMISSION/ REAR AXLE AND HYDRAULIC OIL 7-48
CHECK 4WD FRONT AXLE DIFFERENTIAL AND HUBS OIL LEVEL 7-38
CHECK BATTERY FLUID LEVEL 7-35
CHECK BATTERY FLUID LEVEL 7-52
CHECK BATTERY FLUID LEVEL 7-66
CHECK BRAKE FLUID LEVEL 7-17
CHECK BRAKE PEDAL LATCHING/UNLATCHING 7-71
CHECK ENGINE AIR INTAKE CONNECTIONS7-44
CHECK ENGINE COOLANT LEVEL7-18
CHECK ENGINE OIL LEVEL7-19
CHECK FRONT AND REAR WHEEL NUTS 7-33
CHECK FRONT PTO GEARBOX OIL LEVEL 7-38
CHECK REMOTE CONTROL VALVE DRAIN BOTTLES 7-19
CHECK TRANSMISSION OIL COOLER PIPE COUPLINGS 7-45
CHECK TRANSMISSION/REAR AXLE AND HYDRAULIC OIL LEVEL7-37
CHECK TYRE PRESSURES AND TYRE CONDITION7-33
CHECK VALVE TAPPET CLEARANCE7-55
CHECK WINDSCREEN WASHER RESERVOIR 7-20
CLEAN CAB AIR FILTER7-23
CLEAN COOLER SECTION 7-25
CLEAN DEF/ AdBlue INLINE FILTER 7-45
CLEAN SCR COVER AIR DUCTS7-24
CLEANING THE TRACTOR 7-68
DRAIN AIR RESERVOIR ON AIR OPERATED TRAILER BRAKE 7-20
DRAIN FUEL SYSTEM WATER SEPARATOR 7-16
ENGINE OIL CHANGE 7-5
FUEL REQUIREMENT 7-2
FUEL SYSTEM PRE- FILTER AND WATER TRAP7-70
FUSES AND RELAYS 7-78
GENERAL SPECIFICATIONS7-11
GREASE REAR AXLE SHAFT BEARING 7-51
HEADLIGHT AND WORKLAMP ADJUSTMENT7-73
INSPECT COMPRESSOR DRIVE BELT 7-34
INSPECT POLY V-BELT7-34
INTRODUCTION7-1
LUBRICANTS AND COOLANTS7-9
Maintenance Chart 7-13
PREPARATION FOR USE AFTER STORAGE 7-85
PROTECTING ELECTRONIC AND ELECTRICAL SYSTEMS DURING BATTERY CHARGING OR
WELDING 7-83
PROTECTIVE DEVICES 7-7
SERVICE AIR CONDITIONER SYSTEM7-65
SERVICE OPERATIONS7-21
TRACTOR JACKING POINTS 7-11
TRACTOR STORAGE7-85
MAINTENANCE CHART 7-13
Maintenance Chart 7-13
MOVING THE UNIT4-10
OPERATING IN COLD TEMPERATURES 4-10
REVERSIBLE ENGINE FAN 4-11
OPERATING INSTRUCTIONS4-1
AUTOMATIC ENGINE SHUTDOWN 4-8
AUTOMATIC ENGINE SHUTDOWN WITH ENHANCED KEYPAD (where fitted) 4-9
BOOSTING THE BATTERY 4-7
COOLANT IMMERSION HEATER (where fitted) 4-5
FUEL HEATER (where fitted) 4-5
GRID HEATER COLD START AID (where fitted) 4-4
OPERATING IN COLD TEMPERATURES 4-10
REVERSIBLE ENGINE FAN 4-11
STARTING THE ENGINE 4-3
STOPPING THE ENGINE4-8
TRACTOR REFUELLING 4-1
TRANSMISSION OIL HEATER (where fitted)4-6
OPERATOR’S SEAT 3-10
AIR SUSPENSION SEAT DELUXE 3-10
SEAT BELT3-15
OVERHEAD CONTROLS3-39
INTERIOR LIGHT3-40
SWITCH PANEL WORKLIGHTS 3-39
POWERSHIFT CONTROL LEVER6-49
PREPARING FOR ROAD TRANSPORT5-1
CARRYING THE TRACTOR ON A TRANSPORTER 5-1
SECURE THE HIGH VISIBILITY ROOF PANEL 5-1
REAR HITCH 6-84
ELECTRONIC DRAFT CONTROL6-84
ELECTRONIC DRAFT CONTROL OPERATION6-90
EXTERNAL HITCH CONTROLS 6-96
SETTINGS AND DISPLAY 6-88
REAR POWER TAKE-OFF6-64
ATTACHING PTO DRIVEN EQUIPMENT 6-65
AUTO PTO OPERATION 6-77
CHANGING THE PTO OUTPUT SHAFT 6-64
EXTERNAL PTO CONTROLS6-75
GROUND DRIVE PTO (where fitted) 6-74
PTO OPERATING PRECAUTIONS6-64
PTO OPERATION 6-66
THREE-SPEED PTO SYSTEM 6-73
TWO-SPEED PTO SYSTEM6-71
REARWARD CONTROLS 3-29
AUTOMATIC TEMPERATURE CONTROL (ATC) 3-37
BATTERY ISOLATOR SWITCH3-34
CLIMATE CONTROLS3-35
FAST STEERING SYSTEM (where fitted) 3-32
HEATED SCREENS (where fitted)3-31
HYDRAULIC MASTER SWITCH 3-30
MANUAL TEMPERATURE CONTROL3-36
SWITCHES ON C-PILLAR 3-29
RECOVERY TRANSPORT 5-2
TOWING THE TRACTOR5-2
RIGHT-HAND SIDE CONTROLS3-28
INTEGRATED CONTROL PANEL3-28
SAFETY INFORMATION2-1
BEFORE DRIVING THE TRACTOR 2-2
DIESEL FUEL2-9
DRIVING THE TRACTOR2-3
FIRE EXTINGUISHER2-11
INTENDED USE STATEMENT 2-15
OPERATING THE EXTERNAL CONTROLS2-6
OPERATING THE PTO 2-6
OPERATING THE TRACTOR 2-4
PREVENTION OF FIRE OR EXPLOSION 2-10
PROTECTION OFFERED BY THE TRACTOR 2-12
SAFETY DECALS2-17
SAFETY PRECAUTIONS2-1
SERVICING THE TRACTOR2-7
SPECIFICATIONS9-1
AIR CLEANER SYSTEM 9-8
BRAKES9-13
CAPACITIES9-6
COOLING SYSTEM 9-8
ELECTRICAL EQUIPMENT 9-14
ENGINE9-7
FRONT POWER TAKE OFF9-9
FRONT REMOTE VALVE COUPLERS9-12
FUEL SYSTEM 9-7
GENERAL DIMENSIONS9-1
GROUND SPEED CHART FULL POWERSHIFT TRANSMISSION9-18
GROUND SPEED CHART SEMI POWERSHIFT TRANSMISSION9-15
HYDRAULIC SYSTEM9-10
MAXIMUM OPERATING ANGLE9-4
MAXIMUM OPERATING WEIGHTS9-5
MINIMUM HARDWARE TIGHTENING TORQUES9-21
REAR POWER TAKE-OFF 9-9
REMOTE CONTROL VALVES 9-12
STEERING9-13
THREE POINT HITCH9-10
THREE POINT HITCH FRONT 9-12
TRACTOR WEIGHTS9-5
TRANSMISSION9-8
STARTING THE UNIT 4-3
BOOSTING THE BATTERY 4-7
COOLANT IMMERSION HEATER (where fitted) 4-5
FUEL HEATER (where fitted) 4-5
GRID HEATER COLD START AID (where fitted) 4-4
STARTING THE ENGINE 4-3
TRANSMISSION OIL HEATER (where fitted)4-6
STOPPING THE UNIT4-8
AUTOMATIC ENGINE SHUTDOWN 4-8
AUTOMATIC ENGINE SHUTDOWN WITH ENHANCED KEYPAD (where fitted) 4-9
STOPPING THE ENGINE4-8
STORAGE7-85
PREPARATION FOR USE AFTER STORAGE 7-85
TRACTOR STORAGE7-85
SYMPTOM(S) 8-4
BRAKES 8-6
CAB 8-7
ELECTRICAL SYSTEM8-7
ENGINE8-4
HYDRAULICS8-5
THREE POINT HITCH 8-6
TRANSMISSION8-5
THREE POINT HITCH6-156
ATTACHING THREE-POINT HITCH EQUIPMENT 6-156
FLEXIBLE LINK END ADJUSTMENT6-161
LIFT ROD ADJUSTMENT6-158
LINKAGE STABILISER ADJUSTMENT 6-164
QUICK HITCH6-162
TOP LINK ADJUSTMENT6-160
TRAILER BRAKING SYSTEMS6-173
AIR-OPERATED TRAILER BRAKES 6-173
AUXILIARY AIR SUPPLY CONNECTOR (where fitted) 6-176
HYDRAULIC TRAILER BRAKES6-177
TRAILER BRAKE BIAS CONTROL6-176
TRANSMISSION 6-27
AUTO SHIFT FUNCTION6-38
AUTO SHIFT FUNCTION6-53
AUTO SHIFTING AND ‘GO TO’ MODES6-60
AUTO SHIFTING IN FIELD MODE6-39
AUTO SHIFTING IN FIELD MODE6-54
AUTO SHIFTING IN ROAD MODE 6-42
AUTO SHIFTING IN ROAD MODE 6-57
CREEPER GEARS (where fitted) 6-47
CREEPER GEARS (where fitted) 6-63
DRIVING THE TRACTOR 6-35
DRIVING THE TRACTOR 6-50
ERROR CODES 6-32
FOOT THROTTLE PEDAL6-27
FULL POWERSHIFT TRANSMISSION6-48
HAND THROTTLE6-27
POWERSHIFT CONTROL LEVER 6-34
PROGRAMMING FORWARD AND REVERSE GEAR RATIOS 6-45
PROGRAMMING FORWARD AND REVERSE GEAR RATIOS 6-62
SEMI POWERSHIFT TRANSMISSION6-33
SETTING THE SHARP SHUTTLE FUNCTION 6-46
SHUTTLE LEVER6-28
SPEED MATCHING6-37
SPEED MATCHING6-52
TRANSMISSION DISPLAY6-30
TRANSMISSION OPERATION 6-33
TRANSMISSION OPERATION 6-48
TRANSPORT OPERATIONS 5-1
CARRYING THE TRACTOR ON A TRANSPORTER 5-1
SECURE THE HIGH VISIBILITY ROOF PANEL 5-1
TOWING THE TRACTOR5-2
TROUBLESHOOTING8-1
BRAKES 8-6
CAB 8-7
ELECTRICAL SYSTEM8-7
ENGINE8-4
FAULT CODES AND SYMBOLS 8-2
HYDRAULICS8-5
INTRODUCTION8-1
THREE POINT HITCH 8-6
TRANSMISSION8-5
WHEEL TRACK ADJUSTMENT6-178
BAR TYPE AXLE (where fitted) 6-188
DUAL REAR WHEELS (where fitted) 6-193
FLANGE TYPE AXLE (where fitted)6-185
FRONT AXLE OSCILLATION STOPS6-182
FRONT FENDER6-183
FRONT WHEEL ALIGNMENT6-181
FRONT WHEEL TRACK ADJUSTMENT 6-178
REAR WHEEL TRACK ADJUSTMENT 6-185
STEERING STOPS6-182
WHEN THE WARNING LAMP LIGHTS7-15
CHANGE ENGINE AIR CLEANER OUTHER ELEMENT 7-15
CHECK BRAKE FLUID LEVEL 7-17
DRAIN FUEL SYSTEM WATER SEPARATOR 7-16
WORKING OPERATIONS6-1
AIR-OPERATED TRAILER BRAKES 6-173
ATTACHING PTO DRIVEN EQUIPMENT 6-65
ATTACHING THREE-POINT HITCH EQUIPMENT 6-156
AUTO PTO OPERATION 6-77
AUTO PTO OPERATION 6-82
AUTO SHIFT FUNCTION6-38
AUTO SHIFT FUNCTION6-53
AUTO SHIFTING AND ‘GO TO’ MODES6-60
AUTO SHIFTING IN FIELD MODE6-39
AUTO SHIFTING IN FIELD MODE6-54
AUTO SHIFTING IN ROAD MODE 6-42
AUTO SHIFTING IN ROAD MODE 6-57
AUTOMATED HEADLAND FUNCTIONS6-11
AUXILIARY AIR SUPPLY CONNECTOR (where fitted) 6-176
AUXILIARY FRONT COUPLERS (where fitted)6-106
BALLASTING AND TYRES 6-196
BAR TYPE AXLE (where fitted) 6-188
CHANGING THE PTO OUTPUT SHAFT 6-64
CONNECTING REMOTE CYLINDERS 6-115
CONNECTING REMOTE CYLINDERS 6-141
CONSTANT ENGINE SPEED 6-3
CREATING TIMER PROGRAMMES 6-134
CREEPER GEARS (where fitted) 6-47
CREEPER GEARS (where fitted) 6-63
DELETING A SEQUENCE WITH COLOUR DISPLAY 6-26
DIAGNOSTIC SOCKET6-207
DIFFERENTIAL LOCK 6-6
DRAWBARS AND TOWING ATTACHMENTS 6-167
DRIVING THE TRACTOR 6-35
DRIVING THE TRACTOR 6-50
DUAL REAR WHEELS (where fitted) 6-193
ELECTRICAL POWER CONNECTORS6-208
ELECTRONIC DRAFT CONTROL6-84
ELECTRONIC DRAFT CONTROL OPERATION6-90
ERROR CODES 6-32
EXPLANATION OF SYMBOLS 6-13
EXTERNAL EHR CONTROLS6-150
EXTERNAL HITCH CONTROLS 6-96
EXTERNAL HITCH CONTROLS6-108
EXTERNAL PTO CONTROLS6-75
EXTERNAL POWER CONNECTORS6-210
FLANGE TYPE AXLE (where fitted)6-185
FLEXIBLE LINK END ADJUSTMENT6-161
FOOT THROTTLE PEDAL6-27
FOUR WHEEL DRIVE 6-8
FRONT AXLE OSCILLATION STOPS6-182
FRONT AXLE SUSPENSION (where fitted)6-10
FRONT FENDER6-183
FRONT WHEEL ALIGNMENT6-181
FRONT WHEEL TRACK ADJUSTMENT 6-178
FULL POWERSHIFT TRANSMISSION6-48
GROUND DRIVE PTO (where fitted) 6-74
HAND THROTTLE6-27
HEADLAND FUNCTION AND COLOUR DISPLAY SCREENS6-23
HITCH OPERATION 6-101
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-117
HYDRAULIC OIL LEVEL WHEN USING REMOTE HYDRAULIC EQUIPMENT6-151
HYDRAULIC POWER BEYOND FOR EXTERNAL SERVICES6-153
HYDRAULIC TRAILER BRAKES6-177
INTERNAL POWER CONNECTORS 6-208
IRON WEIGHTS (where fitted)6-199
JOYSTICK OPERATION WITH A FRONT LOADER6-145
LIFT ROD ADJUSTMENT6-158
LINKAGE STABILISER ADJUSTMENT 6-164
LIQUID BALLAST 6-202
MID MOUNT REMOTE VALVES 6-148
OPERATING WITH REMOTE VALVES 6-112
OPERATING WITH REMOTE VALVES 6-143
PTO OPERATING PRECAUTIONS6-64
PTO OPERATION 6-66
PTO OPERATION 6-80
POWERSHIFT CONTROL LEVER 6-34
PROGRAMMING FORWARD AND REVERSE GEAR RATIOS 6-45
PROGRAMMING FORWARD AND REVERSE GEAR RATIOS 6-62
QUICK GUIDE 6-11
QUICK HITCH6-162
RE-PLAYING A SEQUENCE 6-19
REAR WHEEL TRACK ADJUSTMENT 6-185
RECORDING A SEQUENCE6-17
RECORDING AND RE-PLAYING 6-14
REMOTE CONTROL VALVES6-109
REMOTE CONTROL VALVES6-119
SEMI POWERSHIFT TRANSMISSION6-33
SETTING THE REMOTE VALVE PRIORITY6-132
SETTING THE SHARP SHUTTLE FUNCTION 6-46
SETTINGS AND ADJUSTMENTS6-98
SETTINGS AND ADJUSTMENTS 6-126
SETTINGS AND DISPLAY 6-88
SHUTTLE LEVER6-28
SPEED MATCHING6-37
SPEED MATCHING6-52
STEERING STOPS6-182
SWINGING DRAWBARS 6-170
THREE-SPEED PTO SYSTEM 6-73
TOP LINK ADJUSTMENT6-160
TRAILER BRAKE BIAS CONTROL6-176
TRAILER SOCKET ELECTRICAL 6-207
TRANSMISSION DISPLAY6-30
TRANSMISSION OPERATION 6-33
TRANSMISSION OPERATION 6-48
TWO-SPEED PTO SYSTEM6-71
TYRE INFLATION 6-204
TYRE PRESSURES AND PERMISSIBLE LOADS 6-205
VARIABLE ENGINE POWER MANAGEMENT6-1
PLEASE NOTE:
- This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
- Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.