Case IH Tractor PUMA 130, 145, 160 Efficient Power Operator’s Manual
FILE DETAILS:
Case IH Tractor PUMA 130, 145, 160 Efficient Power Operator’s Manual_47892608
Size : 14.5 MB
Format : PDF
Language : English
Number of Pages : 554 pages
Brand: Case IH
Type of machine: Tractor
Type of document: Operator’s Manual
Model: PUMA 130, 145, 160
Part No: 47892608
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:
Case IH Tractor PUMA 130, 145, 160 Efficient Power Operator’s Manual_47892608
1) GENERAL INFORMATION :
- This Manual has been prepared to assist you in the correct procedure for running- in, driving and operating and for the maintenance of your new tractor. Read this Manual carefully. Your tractor is intended for use in normal and customary agricultural applications. If at any time you require advice concerning your tractor, do not hesitate to contact your authorized dealer.
- He has factory trained personnel, genuine manufacturers’ parts and the necessary equipment to carry out all your service requirements.
- The specification are provided for your information and guidance. For further information concerning your tractor and equipment, consult your authorized dealer. All data given in this manual is subject to production variations. Dimensions and weight are approximate only.
- The illustrations do not necessarily show tractors in standard condition or imply that these features are available in all countries. For exact information about any particular tractor, please consult your authorized dealer. Your tractor has been designed and built to give maximum performance, economy and ease of operation under a wide variety of operating conditions.
- Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition. To maintain this condition and ensure troublefree operation, it is important that the routine services, as specified on page 7-15 of this Manual, are carried out at the recommended intervals.
2)ABOUT THIS MANUAL:
- This manual gives information for use of your machine, as intended and under the conditions foreseen by the manufacturer during normal operation and routine service and maintenance. Read and understand; keep it in good condition and always safely store it in the provided pocket in the back of your seat for later easy retrieval.
- This manual does not contain all the information related to periodical service, converting and repairs to be carried out by professional service personnel. The Table of Contents page(s) are provided to have an overview of main manual’s topics.
- A detailed alphabetic index is available at the end of this manual for locating specific items.
- Normal operation means the use of the tractor for the purpose intended by the manufacturer by an operator familiar with the tractor and the mounted or towed equipment and complying with the information for operation and safe practices, as specified by the manufacturer in this manual and by the decals on the tractor and the equipment.
- Normal operation includes the preparation and storage of the tractor, swinging components into work position and vice versa, adding or removing ballast and picking up and setting off attachments.
- Normal operation includes the adjustment and setting of the tractor and equipment, for the specific condition of the field and/or the crop.
3)Routine Service:
- Routine service and maintenance means activities that must be done daily by an operator familiar with the tractor characteristics and complying with the information for routine service and safe practices, as specified by the manufacturer in this manual and by decals on the tractor, in order to maintain its proper function. Routine service includes activities such as fueling, cleaning, washing, topping up fluid levels, greasing, replacing of consumable articles such as lamp bulbs
- Periodical service means activities that must be done at defined intervals by trained personnel familiar with the tractor characteristics and which are complying with the information for periodical service and safe practices, as partly specified by the manufacturer in this manual and in other Company literature, in order to maintain the expected life time of the tractor.
- Converting means activities that must be done by professional service personnel familiar with the tractor characteristics and complying with the information for converting, as partly specified by the manufacturer in this manual, in assembly instructions or in other Company literature, in order to fit the tractor to a specific configuration.
- Repair means activities that must be done by professional service personnel only familiar with the tractor characteristics and complying with the information for repair, as specified by the manufacturer in the dealer’s workshop manual, in order to restore the proper function of the tractor after a failure or degradation of performance.
4)SERVICE PARTS:
- It should be pointed out that genuine parts have been examined and approved by the Company. The installation and/or use of ‘non- genuine’ products could have negative effects upon the design characteristics of your tractor and thereby affect its safety.
- The Company is not liable for any damage caused by the use of ‘non- genuine’ parts and accessories. Only genuine replacement parts should be used. The use of non- genuine parts may invalidate legal approvals associated with this product. It is prohibited to carry out any modifications to the tractor unless specifically authorized, in writing, by the After Sales Service department of the Company.
TABLE OF CONTENTS:
Case IH Tractor PUMA 130, 145, 160 Efficient Power Operator’s Manual_47892608
1 GENERAL INFORMATION
Metric and imperial units abbreviations 1-1
To the owner 1-3
Product identification1-5
Engine identification 1-6
Drive line identification 1-7
Cab identification 1-8
Product identification plate1-8
Ecology and the environment1-9
Noise level information sheet 1-10
Programming tractor functions 1-10
Operator’s manual storage 1-11
Before operating the tractor 1-11
International symbols 1-12
Vibration level information sheet 1-13
Machine stability1-14
Selective Catalytic Reduction (SCR) system 1-18
2 SAFETY INFORMATION
Safety precautions 2-1
Safety decals 2-3
Safety rules2-11
Burn prevention 2-17
Prevention of fire or explosions2-18
Fire extinguisher2-19
Protection offered by the tractor2-20
Hazardous substances2-23
Emergency exit 2-24
Wheel chocks2-25
Intended use statement 2-26
Passenger’s seat2-28
Safety aspects 2-29
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Introduction3-1
Cab air filters 3-5
In cab storage (where fitted)3-6
Cable and wiring routing 3-7
Mobile telephone usage 3-7
Implement monitor installation 3-8
Cab air pressurisation control (where fitted) 3-8
OPERATOR’S SEAT
Air suspension seat deluxe 3-10
Seat belt 3-14
PASSENGER’S SEAT
Passenger seat 3-15
FORWARD CONTROLS
Ignition key 3-16
Hazard light switch3-16
Lights and turn indicator lever 3-17
Follow me home lights 3-17
Windshield wiper and washer controls 3-18
Electronic parking brake3-19
Clutch pedal 3-23
Foot brakes 3-23
Exhaust brake (where fitted) 3-24
Steering column3-25
LEFT-HAND SIDE CONTROLS
Hand brake 3-26
RIGHT-HAND SIDE CONTROLS
Integrated control panel 3-27
REARWARD CONTROLS
Switches on C-pillar 3-28
Hydraulic master switch 3-29
Heated screens (where fitted) 3-30
Fast steering system (where fitted) 3-31
Battery isolator control switch 3-33
Climate controls3-34
Manual temperature control3-35
Automatic Temperature Control (ATC) 3-36
OVERHEAD CONTROLS
Switch panel work lights 3-38
Interior light 3-39
INSTRUMENT CLUSTER
Integrated control unit3-40
Gauges3-40
Indicator and warning lights3-41
Displays 3-44
Transmission display 3-45
Keypad basic3-47
Keypad enhanced 3-48
Selecting or changing the display settings3-50
Adjust menu 3-51
Configure menu3-53
Performance monitor 3-56
Armrest color display 3-61
Pop-up screens on color display 3-63
Performance monitor on color display 3-69
Programming the displays 3-72
Alarm functions 3-75
Accessing stored fault codes 3-77
Warning and advisory symbols3-78
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Refueling the tractor4-1
STARTING THE UNIT
Starting the engine 4-3
Grid heater cold start aid (where fitted) 4-4
Fuel heater (where fitted)4-5
Coolant immersion heater (where fitted)4-5
Transmission oil heater (where fitted)4-6
Boosting the battery4-7
STOPPING THE UNIT
Stopping the engine4-8
Automatic engine shut down4-8
Automatic engine shut down with enhanced keypad (where fitted)4-9
MOVING THE UNIT
Operating in cold temperatures 4-10
Reversible engine fan4-11
5 TRANSPORT OPERATIONS
PREPARING FOR ROAD TRANSPORT
Carrying the tractor on a transporter 5-1
Secure the high visibility roof panel 5-1
RECOVERY TRANSPORT
Freeing a stuck tractor5-2
Towing the tractor 5-3
6 WORKING OPERATIONS
GENERAL INFORMATION
Variable engine power management 6-1
Constant engine speed6-3
Differential lock 6-6
Four wheel drive6-8
Front axle suspension (where fitted)6-10
AUTOMATED HEADLAND FUNCTIONS6-11
Quick guide 6-11
Explanation of symbols 6-13
Recording and replaying6-14
Recording a sequence 6-17
Replaying a sequence 6-19
Headland function and color display screen 6-23
Deleting a sequence with color display6-26
TRANSMISSION
Foot throttle pedal6-27
Hand throttle 6-27
Shuttle lever6-28
Transmission display6-30
Fault codes 6-32
SEMI POWERSHIFT TRANSMISSION 6-33
Transmission operation6-33
Powershift control lever6-34
Driving the tractor6-35
Speed matching 6-37
Auto shift function6-38
Auto shifting field mode6-39
Auto shifting in road mode6-42
Setting the forward and reverse gear ratios 6-45
Setting the sharp shuttle function 6-46
Creeper gears (where fitted) 6-47
FULL POWERSHIFT TRANSMISSION 6-48
Transmission operation6-48
Powershift control lever6-49
Driving the tractor6-50
Speed matching 6-52
Auto shift function6-53
Auto shifting field mode6-54
Auto shifting in road mode6-57
Auto shifting and ‘go to’ modes 6-60
Setting the forward and reverse gear ratios 6-62
Creeper gears (where fitted) 6-63
REAR POWER TAKE-OFF
Power Take-Off (PTO) operating precautions 6-64
Changing the PTO output shaft 6-64
Attaching PTO driven equipment6-65
Power Take-Off (PTO) operation6-66
Three speed PTO systems6-71
Ground drive PTO (where fitted)6-73
External PTO controls 6-74
Auto PTO operation 6-76
FRONT POWER TAKE OFF
Power Take-Off (PTO) operation6-79
Auto PTO operation 6-81
REAR HITCH
Electronic Draft Control (EDC) 6-83
Settings and display 6-87
Electronic Draft Control (EDC) operation6-89
External hitch controls 6-95
FRONT HITCH
Settings and adjustments 6-97
Hitch operation 6-100
Auxiliary front couplers (where fitted)6-105
External hitch controls 6-107
Front hitch management 6-108
HYDRAULIC REMOTE CONTROL VALVES
Remote control valves6-114
Operating with remote valves 6-117
Connecting remote cylinders6-120
Hydraulic oil level when using remote hydraulic equipment 6-122
ELECTRO-HYDRAULIC REMOTE CONTROL VALVES (where fitted)
Remote control valves6-124
Settings and adjustments6-131
Setting the remote valve priority 6-137
Creating timer programs 6-139
Connecting remote cylinders6-146
Operating with remote valves 6-148
Joystick operation with a front loader6-150
Mid mount remote valves6-156
External EHR controls 6-158
Hydraulic oil level when using remote hydraulic equipment 6-159
HYDRAULIC POWER BEYOND PORT
Hydraulic power beyond for external services with mechnical-hydraulic remote control
valves 6-161
Hydraulic power beyond for external services with electro-hydraulic remote control
valves 6-163
THREE POINT HITCH
Attaching three-point hitch equipment 6-166
Lift rod adjustment 6-168
Top link adjustment 6-170
Flexible link end adjustment 6-172
Quick hitch6-173
Linkage stabilizer adjustment 6-175
DRAWBARS AND TOWING ATTACHMENTS
Drawbars and towing attachments6-178
Swinging drawbar 6-181
Automatic pickup hitch6-184
Automatic pickup hitch6-188
Rear trailer hitches 6-192
TRAILER BRAKING SYSTEMS
Air-operated trailer brakes 6-198
Air-operated trailer brakes (Italian type) 6-201
Trailer brake bias control 6-202
Auxiliary air supply connector (where fitted) 6-202
Hydraulic trailer brakes6-203
Hydraulic trailer brakes (Italian type) 6-204
WHEEL TRACK ADJUSTMENT
Front wheel track adjustment 6-205
Front wheel alignment 6-209
Steering stops6-210
Front axle oscillation stops 6-210
Front fender 6-211
REAR WHEEL TRACK ADJUSTMENT6-213
Flange type axle (where fitted) 6-213
Bar type axle (where fitted) 6-216
Dual rear wheels (where fitted) 6-221
BALLASTING AND TIRES
Ballasting and tires 6-224
Iron weights (where fitted)6-227
Liquid ballast 6-230
Tire inflation 6-232
Tire pressures and permissible loads6-233
AUXILIARY POWER CONNECTIONS
Diagnostic socket 6-235
Trailer socket electrical6-235
ELECTRICAL POWER CONNECTORS 6-236
Internal power connectors6-236
External power connectors 6-238
7 MAINTENANCE
GENERAL INFORMATION
Introduction7-1
Fuel requirement7-2
Biodiesel fuel 7-4
Change the engine oil 7-6
Protective devices 7-7
Lubricants and coolants 7-9
Tractor jacking points 7-11
General specifications7-12
Capacities7-13
Organic Acid Technology (OAT) coolant 7-14
MAINTENANCE CHART
Maintenance chart7-15
WHEN THE WARNING LIGHT IS ON
Change the engine air cleaner outer element7-17
Drain the fuel system water separator 7-18
Check the brake fluid level 7-19
EVERY 10 HOURS OR EACH DAY
Check the engine coolant level7-20
Check the engine oil level 7-21
Check the remote control valve drain bottles7-21
Check windscreen washer reservoir7-22
Drain air reservoir on air operated trailer brake 7-22
FIRST 50 HOURS
Service operations7-23
EVERY 50 HOURS
Clean the cab air filter7-24
Clean the SCR cover air ducts7-25
Clean the cooler section7-26
All grease fittings 7-27
Check the front and the rear wheel nuts 7-34
Check the tire pressures and the tire condition 7-34
EVERY 100 HOURS
Inspect the poly V-belt 7-35
Inspect the compressor drive belt7-35
EVERY 300 HOURS
Check the battery fluid level7-36
Adjust the hand brake7-37
Check the transmission oil level, the rear axle oil level and the hydraulic oil level 7-38
Check the 4WD front axle differential oil level and the hubs oil level7-39
Check the front PTO gearbox oil level 7-39
EVERY 600 HOURS
Change engine oil and filter7-40
Change the first stage fuel filter and the fuel filter element 7-42
Change the engine air cleaner outer element7-43
Change the charge pump oil filter7-44
Check the engine air intake connections 7-45
Check the transmission oil cooler pipe couplings 7-46
Clean the DEF/AdBlue in-line filter 7-46
EVERY 1200 HOURS OR ANNUALLY
Change the cab air filters7-47
Change the main oil filter cartridge 7-48
Change the 4WD differential oil 7-49
Change the 4WD planetary hub oil 7-50
Change the front PTO gearbox oil 7-50
Grease the rear axle shaft bearing 7-51
EVERY 1200 HOURS OR EVERY 2 YEARS
Change the DEF/AdBlue in-line filter7-52
Change the engine air cleaner inner element7-53
Check the valve tappet clearance7-54
Change the air brake drier reservoir7-55
Change the poly V-belts 7-56
Change the transmission oil, the rear axle oil and the hydraulic oil 7-58
EVERY 1800 HOURS OR EVERY 2 YEARS
Change the engine breather filter7-59
EVERY 3600 HOURS OR EVERY 2 YEARS
Change the DEF/AdBlue main filter 7-60
EVERY 3600 HOURS OR EVERY 4 YEARS
Change the engine coolant fluid – OAT type coolant 7-61
EVERY 36 MONTHS
Check the air-conditioning system 7-65
GENERAL MAINTENANCE
Cleaning the tractor 7-66
Check first stage fuel filter and water trap 7-68
Bleeding the fuel system7-68
Hydraulic system hoses 7-69
Check the brake pedal latching/unlatching7-69
Adjust the cab suspension (where fitted) 7-70
Adjust the automatic pickup hitch7-71
Adjust the automatic pickup hitch7-72
Headlight and work light adjustment7-73
Bulb replacement 7-74
Fuses and relays 7-78
Protecting the electronic and electrical systems during battery charging or welding 7-83
Battery removal and installation 7-84
STORAGE
Tractor storage7-85
Preparation for use after storage7-85
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Introduction 8-1
ALARM(S)
Fault codes and symbols 8-2
SYMPTOM(S)
Engine8-4
Transmission 8-5
Hydraulics 8-5
Three-point hitch 8-6
Brakes8-6
Cab8-6
Electrical system 8-7
9 SPECIFICATIONS
General dimensions 9-1
Maximum operating angle 9-4
Maximum permissible operating weights 9-5
Tractor weights9-5
Capacities 9-6
Engine9-7
Fuel system9-7
Air cleaner system 9-8
Cooling system9-8
Transmission 9-8
Rear Power Take-Off (PTO) 9-9
Front Power Take-Off (PTO) 9-9
Hydraulic system9-10
Three-point hitch9-10
Remote control valves9-12
Three-point hitch front 9-12
Front remote control valve couplers 9-12
Brakes 9-13
Steering9-13
Electrical equipment9-14
Ground speed chart Semi-Powershift transmission 9-15
Ground speed chart Full-Powershift transmission 9-18
Minimum hardware tightening torques 9-21
10 ACCESSORIES
Radio (where fitted)10-1
External rear view mirrors10-1
Auxiliary headlights 10-3
Rotating beacon 10-4
Front-end loader fixation points10-5
11 FORMS AND DECLARATIONS
CE declaration of conformity11-1
Service record 1st 50 hour, Owner copy11-3
Service record 1st 50 hour, Dealer copy11-5
INDEX DETAILS:
Case IH Tractor PUMA 130, 145, 160 Efficient Power Operator’s Manual_47892608
A
Accessing stored fault codes 3-77
Adjust menu 3-51
Adjust the automatic pickup hitch 7-71, 7-72
Adjust the cab suspension (where fitted) 7-70
Adjust the hand brake 7-37
Air cleaner system 9-8
Air-operated trailer brakes 6-198
Air-operated trailer brakes (Italian type) 6-201
Air suspension seat deluxe 3-10
Alarm functions3-75
All grease fittings7-27
Armrest color display 3-61
Attaching PTO driven equipment 6-65
Attaching three-point hitch equipment 6-166
AUTOMATED HEADLAND FUNCTIONS 6-11
Automatic engine shut down 4-8
Automatic engine shut down with enhanced keypad (where fitted) 4-9
Automatic pickup hitch 6-184, 6-188
Automatic Temperature Control (ATC)3-36
Auto PTO operation 6-76, 6-81
Auto shift function 6-38, 6-53
Auto shifting and ‘go to’ modes6-60
Auto shifting field mode6-39, 6-54
Auto shifting in road mode 6-42, 6-57
Auxiliary air supply connector (where fitted) 6-202
Auxiliary front couplers (where fitted) 6-105
Auxiliary headlights 10-3
B
Ballasting and tires 6-224
Bar type axle (where fitted)6-216
Battery isolator control switch3-33
Battery removal and installation 7-84
Before operating the tractor 1-11
Biodiesel fuel 7-4
Bleeding the fuel system 7-68
Boosting the battery 4-7
Brakes 8-6, 9-13
Bulb replacement7-74
Burn prevention2-17
C
Cab8-6
Cab air filters 3-5
Cab air pressurisation control (where fitted)3-8
Cab identification1-8
Cable and wiring routing3-7
Capacities 7-13, 9-6
Carrying the tractor on a transporter5-1
CE declaration of conformity 11-1
Change engine oil and filter 7-40
Change the 4WD differential oil7-49
Change the 4WD planetary hub oil 7-50
Change the air brake drier reservoir 7-55
Change the cab air filters 7-47
Change the charge pump oil filter 7-44
Change the DEF/AdBlue in-line filter7-52
Change the DEF/AdBlue main filter 7-60
Change the engine air cleaner inner element7-53
Change the engine air cleaner outer element7-17, 7-43
Change the engine breather filter 7-59
Change the engine coolant fluid – OAT type coolant7-61
Change the engine oil 7-6
Change the first stage fuel filter and the fuel filter element7-42
Change the front PTO gearbox oil 7-50
Change the main oil filter cartridge 7-48
Change the poly V-belts7-56
Change the transmission oil, the rear axle oil and the hydraulic oil 7-58
Changing the PTO output shaft6-64
Check first stage fuel filter and water trap 7-68
Check the 4WD front axle differential oil level and the hubs oil level 7-39
Check the air-conditioning system 7-65
Check the battery fluid level 7-36
Check the brake fluid level 7-19
Check the brake pedal latching/unlatching 7-69
Check the engine air intake connections 7-45
Check the engine coolant level7-20
Check the engine oil level 7-21
Check the front and the rear wheel nuts 7-34
Check the front PTO gearbox oil level7-39
Check the remote control valve drain bottles7-21
Check the tire pressures and the tire condition 7-34
Check the transmission oil cooler pipe couplings 7-46
Check the transmission oil level, the rear axle oil level and the hydraulic oil level 7-38
Check the valve tappet clearance 7-54
Check windscreen washer reservoir 7-22
Cleaning the tractor 7-66
Clean the cab air filter 7-24
Clean the cooler section7-26
Clean the DEF/AdBlue in-line filter 7-46
Clean the SCR cover air ducts7-25
Climate controls3-34
Clutch pedal 3-23
Configure menu3-53
Connecting remote cylinders6-120, 6-146
Constant engine speed6-3
Coolant immersion heater (where fitted) 4-5
Cooling system 9-8
Creating timer programs 6-139
Creeper gears (where fitted) 6-47, 6-63
D
Deleting a sequence with color display 6-26
Diagnostic socket 6-235
Differential lock 6-6
Displays 3-44
Drain air reservoir on air operated trailer brake 7-22
Drain the fuel system water separator7-18
Drawbars and towing attachments6-178
Drive line identification1-7
Driving the tractor 6-35, 6-50
Dual rear wheels (where fitted) 6-221
E
Ecology and the environment1-9
Electrical equipment 9-14
ELECTRICAL POWER CONNECTORS 6-236
Electrical system8-7
Electronic Draft Control (EDC)6-83
Electronic Draft Control (EDC) operation 6-89
Electronic parking brake3-19
Emergency exit2-24
Engine 8-4, 9-7
Engine identification 1-6
Exhaust brake (where fitted) 3-24
Explanation of symbols6-13
External EHR controls6-158
External hitch controls 6-95, 6-107
External power connectors 6-238
External PTO controls 6-74
External rear view mirrors 10-1
F
Fast steering system (where fitted) 3-31
Fault codes 6-32
Fault codes and symbols 8-2
Fire extinguisher2-19
Flange type axle (where fitted) 6-213
Flexible link end adjustment6-172
Follow me home lights3-17
Foot brakes 3-23
Foot throttle pedal 6-27
Four wheel drive6-8
Freeing a stuck tractor5-2
Front axle oscillation stops 6-210
Front axle suspension (where fitted)6-10
Front-end loader fixation points10-5
Front fender 6-211
Front hitch management 6-108
Front Power Take-Off (PTO) 9-9
Front remote control valve couplers 9-12
Front wheel alignment6-209
Front wheel track adjustment6-205
Fuel heater (where fitted) 4-5
Fuel requirement7-2
Fuel system 9-7
FULL POWERSHIFT TRANSMISSION 6-48
Fuses and relays7-78
G
Gauges 3-40
General dimensions 9-1
General specifications 7-12
Grease the rear axle shaft bearing 7-51
Grid heater cold start aid (where fitted) 4-4
Ground drive PTO (where fitted) 6-73
Ground speed chart Full-Powershift transmission 9-18
Ground speed chart Semi-Powershift transmission9-15
H
Hand brake 3-26
Hand throttle 6-27
Hazard light switch 3-16
Hazardous substances2-23
Headland function and color display screen6-23
Headlight and work light adjustment 7-73
Heated screens (where fitted)3-30
Hitch operation6-100
Hydraulic master switch3-29
Hydraulic oil level when using remote hydraulic equipment 6-122, 6-159
Hydraulic power beyond for external services with electro-hydraulic remote control valves6-163
Hydraulic power beyond for external services with mechnical-hydraulic remote control valves 6-161
Hydraulics8-5
Hydraulic system9-10
Hydraulic system hoses7-69
Hydraulic trailer brakes 6-203
Hydraulic trailer brakes (Italian type) 6-204
I
Ignition key 3-16
Implement monitor installation3-8
In cab storage (where fitted) 3-6
Indicator and warning lights 3-41
Inspect the compressor drive belt 7-35
Inspect the poly V-belt7-35
Integrated control panel3-27
Integrated control unit 3-40
Intended use statement2-26
Interior light 3-39
Internal power connectors 6-236
International symbols 1-12
Introduction 3-1, 7-1, 8-1
Iron weights (where fitted) 6-227
J
Joystick operation with a front loader 6-150
K
Keypad basic 3-47
Keypad enhanced 3-48
L
Lift rod adjustment 6-168
Lights and turn indicator lever3-17
Linkage stabilizer adjustment 6-175
Liquid ballast 6-230
Lubricants and coolants7-9
M
Machine stability1-14
Maintenance chart 7-15
Manual temperature control 3-35
Maximum operating angle 9-4
Maximum permissible operating weights 9-5
Metric and imperial units abbreviations 1-1
Mid mount remote valves 6-156
Minimum hardware tightening torques9-21
Mobile telephone usage3-7
N
Noise level information sheet 1-10
O
Operating in cold temperatures4-10
Operating with remote valves 6-117, 6-148
Operator’s manual storage 1-11
Organic Acid Technology (OAT) coolant 7-14
P
Passenger’s seat2-28
Passenger seat3-15
Performance monitor 3-56
Performance monitor on color display3-69
Pop-up screens on color display 3-63
Powershift control lever6-34, 6-49
Power Take-Off (PTO) operating precautions6-64
Power Take-Off (PTO) operation 6-66, 6-79
Preparation for use after storage 7-85
Prevention of fire or explosions2-18
Product identification 1-5
Product identification plate 1-8
Programming the displays 3-72
Programming tractor functions1-10
Protecting the electronic and electrical systems during battery charging or welding 7-83
Protection offered by the tractor 2-20
Protective devices 7-7
Q
Quick guide 6-11
Quick hitch 6-173
R
Radio (where fitted) 10-1
Rear Power Take-Off (PTO) 9-9
Rear trailer hitches 6-192
REAR WHEEL TRACK ADJUSTMENT 6-213
Recording and replaying6-14
Recording a sequence6-17
Refueling the tractor 4-1
Remote control valves6-114, 6-124, 9-12
Replaying a sequence6-19
Reversible engine fan 4-11
Rotating beacon10-4
S
Safety aspects 2-29
Safety decals 2-3
Safety precautions 2-1
Safety rules 2-11
Seat belt3-14
Secure the high visibility roof panel 5-1
Selecting or changing the display settings 3-50
Selective Catalytic Reduction (SCR) system1-18
SEMI POWERSHIFT TRANSMISSION 6-33
Service operations 7-23
Service record 1st 50 hour, Dealer copy 11-5
Service record 1st 50 hour, Owner copy 11-3
Settings and adjustments 6-97, 6-131
Settings and display 6-87
Setting the forward and reverse gear ratios6-45, 6-62
Setting the remote valve priority 6-137
Setting the sharp shuttle function 6-46
Shuttle lever 6-28
Speed matching6-37, 6-52
Starting the engine 4-3
Steering 9-13
Steering column3-25
Steering stops6-210
Stopping the engine 4-8
Swinging drawbar 6-181
Switches on C-pillar 3-28
Switch panel work lights3-38
T
Three-point hitch 8-6, 9-10
Three-point hitch front 9-12
Three speed PTO systems 6-71
Tire inflation 6-232
Tire pressures and permissible loads 6-233
Top link adjustment 6-170
To the owner 1-3
Towing the tractor 5-3
Tractor jacking points 7-11
Tractor storage 7-85
Tractor weights 9-5
Trailer brake bias control 6-202
Trailer socket electrical 6-235
Transmission 8-5, 9-8
Transmission display 3-45, 6-30
Transmission oil heater (where fitted)4-6
Transmission operation6-33, 6-48
V
Variable engine power management6-1
Vibration level information sheet 1-13
W
Warning and advisory symbols3-78
Wheel chocks 2-25
Windshield wiper and washer controls3-18
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]