Case IH Tractor MXU 100 MXU 110, MXU 115, MXU 125, MXU 135 Maxxum Operator’s Manual – PDF DOWNLOAD

Case IH Tractor MXU 100 MXU 110, MXU 115, MXU 125, MXU 135 Maxxum Operator’s Manual

FILE DETAILS:

Case IH Tractor MXU 100 MXU 110, MXU 115, MXU 125, MXU 135 Maxxum Operator’s Manual_6-66250

VIDEO PREVIEW OF THE MANUAL:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case IH Tractor MXU 100 MXU 110, MXU 115, MXU 125, MXU 135 Maxxum Operator’s Manual_6-66250

INTRODUCTION

• This manual is designed to assist Dealer and Case IH personnel with the installation of the MXU MAXXUM tractors. It is based around the “5 Point Plan” whereby the installer explains the important points of the unit.
• Starting at point 1 –“rear of unit” – travelling in anti clockwise direction, finishing at point 5 – “cab”. Chapters Point One to Point Five of this booklet correspond with the relevant point on this 5-point plan and contain a diagram with the important components for discussion having a location number.
• This manual should be used as a “Quick Reference Guide” to aid the installer to discuss the important points of the unit. All relevant information to the operation and maintenance of this product is comprehensively explained in the Operator’s Manual.
• It is important that reference is constantly made to the Operator’s Manual throughout the installation to ensure its use is promoted to the customer.

PRE INSTALLATION

Prior to delivering the new product to the customer, it is very important that the following is carried out. Completing the checklist will ensure the installer is fully prepared to deliver and install the unit in a professional manner, thereby enabling the customer to operate his recent purchase with optimum results. Installation Checklist,
Ensure that:
1. The Customer Profile has been reviewed, and discussed with the Salesman.
2. “Pre Delivery Inspection” has been reviewed, and corrective action has been taken on the faulty items
detected; the “Pre Delivery Inspection Certificate” section of the After Sales Logbook (If available) has been
completed and signed.
3. Technical Installation Manual and Operator’s Manual have been read and fully understood to be able to
provide a professional presentation.
4. The “Product” and “Your Case IH Dealer” sections of the After Sales Logbook (If available) are completed.
5. Unit is in excellent condition.
6. The Product is ready for transportation.
7. Appointment confirmed, and the location for delivery and installation agreed.
8. There is sufficient fuel for operating the unit during installation.
9. The Operator’s Manual and After Sales Logbook (If available) are within the unit.

TABLE OF CONTENTS:

Case IH Tractor MXU 100 MXU 110, MXU 115, MXU 125, MXU 135 Maxxum Operator’s Manual_6-66250

• INTRODUCTION 4
• PRE INSTALLATION 5
• SAFETY PRECAUTIONS 6
• 5 POINT PLAN 14
• POINT ONE – REAR OF TRACTOR 15
• POINT TWO – RIGHT SIDE OF TRACTOR 30
• POINT THREE – FRONT OF TRACTOR 41
• POINT FOUR – LEFT SIDE OF TRACTOR 53
• POINT FIVE – CAB 62
  – ILLUSTRATION 1 – CAB CONTROLS 64
  – ILLUSTRATION 2 – FRONT CONSOLE CONTROLS 70
  – ILLUSTRATION 3 – ANALOGUE/DIGITAL INSTRUMENTATION 76
  – ILLUSTRATION 4 – RIGHT HAND CONSOLE CONTROLS 84
  – ILLUSTRATION 5 – SWITCH PANEL 98
  – ILLUSTRATION 6 – ELECTRONIC DRAFT CONTROL (EDC) 106
  – ILLUSTRATION 7 – MECHANICAL LOWER LINK SENSING 110
  – ILLUSTRATION 8 – LEFT HAND ‘C’ PILLAR CONTROLS 112
  – ILLUSTRATION 9 – ROOF MOUNTED CONTROLS 114

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]