Case IH Tractor Farmall 85C, 95C, 105C Operator’s Manual
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
This manual contains information concerning the adjustment and maintenance of your new equipment. You have purchased a dependable machine, but only by proper care and operation can you expect to receive the performance and long service built into this equipment. Please have all operators read this manual carefully and keep it available for ready reference. The dealer CASE IH will provide instructions on the general operation of new equipment.
- The dealer’s staff, assigned to maintenance, is available for any questions related to the operation of the machine. Your CASE IH dealer carries a complete line of genuine CASE IH service parts.
- These parts are manufactured and carefully inspected to insure high quality and accurate fitting of any necessary replacement parts. Be prepared to give your dealer the model and product identification number of your new equipment when ordering parts.
- Locate these numbers now and record them below. Refer to the ’General Information’ section of this manual for the location of the model and product identification numbers of your machine.
TABLE OF CONTENTS:
Case IH Tractor Farmall 85C, 95C, 105C Operator’s Manual_47604404
1 GENERAL INFORMATION
Note to the Owner 1-1
EC Declaration of Conformity 1-3
Commission directive 2010/52/EU 1-5
Noise level1-12
Electro-magnetic interference (EMC)1-13
International symbols 1-14
Introduction1-16
Operator’s manual storage 1-17
Tractor intended use 1-18
Ecology and the Environment 1-20
Identification plates 1-21
Approval data plate 1-23
Component Identification 1-24
2 SAFETY INFORMATION
Safety rules 2-1
Safety information2-2
Air conditioning safety regulations 2-6
Vehicle vibration levels 2-7
Cab guard 2-8
Machine stability2-10
Personal protective equipment (PPE)2-12
Tractor jacking points 2-13
Hazardous chemicals 2-14
Burn prevention 2-15
Fire or explosion prevention 2-16
Getting in and out of the machine 2-17
Emergency exit 2-18
Safety signs 2-19
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
General information3-1
Cab 3-2
OPERATOR’S SEAT
Mechanically-adjusted operator seat – Adjust 3-6
Pneumatically-adjusted operator seat – Adjust3-7
Seat belt3-9
PASSENGER’S SEAT
Passenger seat 3-10
FORWARD CONTROLS
Instrument cluster 3-11
Console Front console – Localisation overview 3-16
LEFT-HAND SIDE CONTROLS
Cabless version3-20
Version with cab3-20
Handbrake 3-21
RIGHT-HAND SIDE CONTROLS
Cabless version3-22
Version with cab3-23
HI-LO version with cab 3-24
Console Right-hand console – Localisation overview 3-25
Heating, ventilation or air-conditioning control 3-26
EXTERIOR CONTROLS
Trailer electrical socket 3-28
DISPLAY SETTINGS
Programmable display 3-29
Adjusting the dashboard/display brightness 3-30
Calibrating speed 3-32
Calibrating tool width 3-34
Programming maintenance work 3-35
Activating/deactivating buzzer3-37
Setting units of measurement 3-38
Regenerating the diesel particulate filter (DPF) automatically/manually3-39
Resetting the oil change counter 3-44
Viewing error codes 3-45
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Basic operating safety rules 4-1
STARTING THE UNIT
Starting the Engine 4-3
Machine movement start-up4-5
STOPPING THE UNIT
Stopping the engine4-6
Battery disconnect switch4-7
MOVING THE UNIT
Transmission operation 4-8
12 x 12 transmission speed table4-12
Speed table for 12 x 12 gearbox with additional reducer (20 x 12) 4-14
Speed table for 12 x 12 gearbox with additional reducer (20 x 20) 4-16
Transmission speed table 12 x 12 with “HI-LO” (24 x 24)4-18
5 TRANSPORT OPERATIONS
ROAD TRANSPORT
Transporting the machine5-1
RECOVERY TRANSPORT
Towing the tractor 5-2
6 WORKING OPERATIONS
FOUR WHEEL DRIVE (4WD)
Four-wheel drive with electro-hydraulic control 6-1
DIFFERENTIAL LOCK
Mechanical differential lock6-2
Electrohydraulic differential lock 6-3
REMOTE CONTROL VALVES
Safety rules 6-4
Rear remote control valve(s) 6-5
Single/double action hydraulic valves 6-7
REAR POWER TAKE-OFF (PTO)
Safety rules 6-8
General6-9
Speed adjustment 6-9
Electrohydraulically controlled power take-off 6-10
Mechanically controlled power take-off 6-12
Power take-off speeds 6-14
Power Take-Off (PTO) fender switch operation6-15
FRONT POWER TAKE-OFF (PTO)
Safety rules 6-17
Front Power Take-Off (PTO) 6-18
REAR HYDRAULIC LIFT
General safety and precautions 6-19
Hydraulic lift with mechanical control 6-20
Lift-O-Matic® control – Operating6-22
Hydraulic lift with electronic control6-24
Hydraulic lift external controls6-30
FRONT HYDRAULIC LIFT
Safety rules 6-32
Front hydraulic lift6-32
REAR 3-POINT HITCH
Three-point linkage 6-33
Three-point linkage dimensions 6-35
Quick coupler 6-36
Additional equipment attachment points 6-38
FRONT 3-POINT HITCH
Front lift with standard axle support6-40
Front lift with multifunction axle support 6-42
Quick hitch 6-44
TOWBAR
General safety rules 6-45
Swinging drawbar6-46
REAR TOW HITCH
General safety rules 6-47
Towing hitch6-48
WHEELS AND TIRES
Wheels and tires 6-53
Tire dimensions 6-57
WHEEL TRACK ADJUSTMENT
Adjustment of the front tracks6-59
Adjustment of the front mudguards6-61
Adjustment of the steering angles 6-63
Front tracks diagram6-64
Rear tracks diagram 6-66
BALLAST
Safety rules 6-67
Front ballast6-68
Rear Ballast6-68
Wheels – Ballast 6-69
TRAILER BRAKING SYSTEM
Hydraulic valve for trailer brakes6-73
Mechanical trailer brake bracket6-75
7 MAINTENANCE
GENERAL INFORMATION
General safety before you service7-1
Introduction7-3
Fuel supply7-4
Biodiesel fuel – Biodiesel Fuels7-5
Body maintenance 7-6
Opening the hood 7-8
Fluids and lubricants 7-9
MAINTENANCE CHART
Maintenance Chart7-10
As required
Radiator expansion tank7-12
Winshield washer reservoir7-12
Air conditioning – Dehydration filter 7-12
Distributor oil recovery pan 7-13
Radiator – Check 7-13
Brakes – Adjust 7-13
Machine lights 7-14
Tire pressure7-14
Clutch pedal adjustment7-15
At warning message display
Dry air filter – External cartridge 7-16
Brake fluid level7-17
Fuel filter water drain 7-17
Every 10 hours or daily
Engine oil level 7-18
After first 50 hours
Maintenance – Tighten 7-18
Maintenance – Check 7-18
Maintenance – Replace 7-19
Maintenance – Cleaning 7-19
Maintenance – Test7-20
Maintenance – Grease 7-20
Every 50 hours
Rear three-point hitch – Grease 7-21
Front axle 7-21
Rear tow hitch 7-22
Front hitch – Grease 7-23
Every 100 hours
Air conditioning condenser 7-24
Transmission oil heat exchanger 7-24
Intercooler7-24
Cab air filters7-25
Cab recirculated air filter7-25
Alternator belt 7-26
Compressor belt7-26
Every 300 hours
Hydraulic circuit oil filter 7-27
Auxiliary services oil filter 7-27
Dry air filter – External cartridge 7-28
Transmission and hydraulic lift7-28
Front Axle Oil7-29
Front axle final drives7-29
Front axle spindle 7-29
Every 600 hours
Change engine oil and filter7-30
Replacing the fuel filters 7-31
Fuel prefilter 7-31
Wheel bolt torque 7-32
Every 1200 hours or annually
Rear wheel hub7-33
Replacing cab air filters 7-33
Replacing air filters7-33
Fuel tank drain 7-34
Blow-by filter7-34
Every 1200 hours or two years
Replacing front axle oil 7-35
Replacing front axle final drive oil7-35
Replacing transmission oil 7-35
Washing cooling system7-37
Every 3000 hours
Diesel particulate filter (DPF) 7-39
ELECTRICAL SYSTEM
Battery service 7-40
Fuses and relay box 7-42
Fuse and relay locations7-44
Light adjustments 7-54
Hood lamp replacement 7-55
STORAGE
Tractor storage7-56
CALIBRATION
Clutch calibration 7-57
Clutch calibration 7-60
Electronic lift calibration 7-63
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
TROUBLESHOOTING ENGINE 8-1
Electrical system – Troubleshooting ELECTRICAL SYSTEM 8-3
Hydraulic systems – Troubleshooting HYDRAULIC SYSTEM 8-4
Rear three-point hitch – Troubleshooting HYDRAULIC LIFT AND 3−POINT LINKAGE
8-5
Hydraulic service brakes – Troubleshooting 8-6
Cab climate control – Troubleshooting 8-7
ALARM(S)
Alarms 8-8
Display warnings overview 8-9
SYMPTOM(S)
Viewing error codes8-13
Error code identification 8-13
Fault code of digital instrument 8-15
9 SPECIFICATIONS
Dimensions and weights 9-1
Maximum permitted loads on front and rear axle 9-4
Maximum permitted loads on drawbar9-5
Maximum permitted loads on towing hitch 9-5
Technical data 9-6
10 ACCESSORIES
Radio10-1
Joystick and Electric Hydraulic (EH) control – Operating 10-13
FILE DETAILS:
Case IH Tractor Farmall 85C, 95C, 105C Operator’s Manual_47604404
Size : 18.1 MB
Format : PDF
Language : English
Number of Pages : 310 pages
Brand: Case IH
Type of machine: Tractor
Type of document: Operator’s Manual
Model: Farmall 85C, 95C, 05C
Part No: 47604404
PLEASE NOTE:
- This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
- This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
- Require some other service manual or have any queries: please WRITE to us at [email protected]
