Case IH Tractor Farmall 45A, Farmall 50A Operator’s Manual
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
- This Manual has been prepared to assist you in the correct procedure for running–in, driving and operating and for the maintenance of your new tractor. Your tractor, which was designed to power and propel itself, is intended for use in normal and customary agricultural applications. Read this Manual carefully and keep it in a convenient place for future references. If at any time you require advice concerning your tractor, do not hesitate to contact your Authorized Dealer.
- He has company trained personnel, genuine manufacturers’ parts and the necessary equipment to carry out all your service requirements. All data given in this manual is subject to production variations. Dimensions and weight are approximate only and the illustrations do not necessarily show tractors in standard condition. For exact information about any particular tractor, please consult your CASE IH dealer.
- Your tractor has been designed and built to give maximum performance, economy and ease of operation under a wide variety of operating conditions. Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition. To maintain this condition and trouble-free operation, it is important that the routine services are carried out at the recommended intervals.
TABLE OF CONTENTS:
Case IH Tractor Farmall® 45A, Farmall® 50A Operator’s Manual_47982704
1 GENERAL INFORMATION
Note to the owner 1-1
Product identification1-3
Product identification plate1-4
International symbols1-6
Noise level1-7
Vibration level information sheet1-7
Machine stability1-8
Personal safety 1-12
Before operating the tractor1-13
2 SAFETY INFORMATION
Safety precautions2-1
Before driving the tractor2-1
Operating the tractor2-2
Operating the Power Take-Off (PTO) 2-3
Servicing the tractor 2-3
Prevention of fire or explosions 2-4
Diesel fuel 2-5
Fire extinguisher2-5
Safety decals2-6
Protection offered by the tractor2-15
Intended use statement2-16
3 CONTROLS AND INSTRUMENTS
OPERATOR’S SEAT
Operator seat adjustments3-1
Seat belt 3-2
FORWARD CONTROLS
Switches and controls 3-3
Throttle control adjustment3-3
Headlight switch control 3-4
Hazard warning light switch 3-5
Foot brakes3-5
Foot accelerator 3-6
Clutch pedal 3-6
Shuttle lever 3-6
LEFT-HAND SIDE CONTROLS
Parking brake – adjustment3-7
Four-Wheel Drive(4WD) lever 3-7
Transmission range lever 3-7
Power Take-Off (PTO) 3-8
RIGHT-HAND SIDE CONTROLS
Differential lock pedal 3-8
Transmission main shift lever 3-9
INSTRUMENT PANEL
Indicator and warning lights 3-9
Gauges 3-10
ROLL OVER PROTECTIVE STRUCTURE
Roll Over Protective Structure (ROPS)3-11
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Tractor refuelling4-1
STARTING THE UNIT
Boosting the battery 4-2
Starting the engine4-2
STOPPING THE UNIT
Stopping the engine 4-6
5 TRANSPORT OPERATIONS
PREPARING FOR ROAD TRANSPORT
Carrying the tractor on a transporter5-1
RECOVERY TRANSPORT
Towing the tractor 5-1
Frame localization overview 5-2
6 WORKING OPERATIONS
TRANSMISSION
Transmission6-1
POWER TAKE OFF (PTO)
PTO operation safety rules6-2
Attaching Power-Take Off (PTO) driven equipment6-3
Power Take-Off (PTO) operation6-3
REAR HITCH
Hydraulic Power Lift (HPL)6-5
THREE POINT HITCH
Three-point hitch6-7
Lift rod adjustment6-8
Top link adjustment6-9
Swinging drawbar6-11
Flexible link end adjustment6-11
Telescopic stabilizers 6-12
REMOTE CONTROL VALVES
Remote control valves – safety rules 6-12
Rear remote control valve(s) 6-13
AUXILIARY POWER CONNECTIONS
Trailer electrical socket 6-13
WHEEL TRACK ADJUSTMENT
Front wheel track adjustment6-14
Front wheels-toe-in-adjust 6-15
Wheel track adjustment6-17
BALLASTING AND TIRES
Ballast6-18
Iron weights (where fitted)6-19
Liquid ballast 6-20
Tire inflation6-20
Tire load and inflation charts 6-21
7 MAINTENANCE
GENERAL INFORMATION
Biodiesel fuel7-1
Introduction7-2
Fuel requirement7-3
Guards7-4
Lubricants and coolants 7-5
Consumables7-5
MAINTENANCE CHART
Maintenance chart7-6
EVERY 10 HOURS OR EACH DAY
Check engine oil level7-7
Radiator coolant level check7-7
Steering reservoir oil level check 7-8
FIRST 50 HOURS
Service operations7-8
EVERY 50 HOURS
Clutch adjustment 7-9
Brake pedal adjustment 7-9
Wheel bolts and nuts – Check7-10
Tire pressure 7-10
Alternator belt7-10
Grease fittings7-11
Transmission, rear axle, and hydraulic system oil level – Check 7-14
Drain the fuel system water separator 7-14
EVERY 100 HOURS
Change engine oil and filter7-15
EVERY 150 HOURS
Service the engine air cleaner 7-16
Battery electrolyte level7-18
EVERY 200 HOURS
Change the fuel filter 7-18
EVERY 300 HOURS
Check the 4WD front axle differential oil level and the hubs oil level7-19
Power Take-Off (PTO) clutch lever 7-20
Front wheel bearings 7-20
EVERY 600 HOURS
Transmission breather – Cleaning7-21
Hydraulic oil filter 7-21
Change the engine air cleaner outer element7-22
Engine tappet valve clearance 7-23
Steering toe-in – Adjust 7-24
EVERY 1200 HOURS OR ANNUALLY
Fuel injectors 7-24
Change the transmission oil, the rear axle oil and the hydraulic oil7-24
Change the steering oil and filter 7-25
Change the 4WD differential oil7-26
Change the 4WD planetary hub oil 7-26
EVERY 1200 HOURS OR TWO YEARS
Change the engine coolant fluid 7-27
Air cleaner inner element – Replace7-28
GENERAL MAINTENANCE
Bleeding the fuel injection system7-28
Engine idle speed7-30
Bulb replacement 7-31
Fuse replacement7-31
Protecting the electronic and electrical systems during battery charging or welding7-32
Alternator 7-33
STORAGE
Tractor storage 7-34
Preparation for use after storage 7-34
8 TROUBLESHOOTING
SYMPTOM(S)
Engine 8-1
Electrical system8-2
Hydraulic system8-3
Hydraulic lift 8-3
Brakes 8-3
9 SPECIFICATIONS
Speed charts9-1
Engine 9-1
Capacities 9-2
Cooling system9-2
Electrical system9-2
Fuel system 9-3
Brakes 9-3
Steering 9-3
Power Take-Off (PTO) 9-3
Hydraulic system9-4
Three-point hitch9-4
Clutch 9-4
Tires 9-4
General dimensions 9-5
Operating weights 9-6
FILE DETAILS:
Case IH Tractor Farmall® 45A, Farmall® 50A Operator’s Manual_47982704
Size : 15 MB
Format : PDF
Language : English
Number of Pages : 128 pages
Brand: Case IH
Type of machine: Tractor
Type of document: Operator’s Manual
Model: Farmall® 45A, Farmall® 50A
Part No: 47982704
PLEASE NOTE:
- This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
- This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
- Require some other service manual or have any queries: please WRITE to us at [email protected]
