CASE CX330 EXCAVATOR Operator’s Manual
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
DESCRIPTION:
- Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. However, the risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions. Read this manual carefully, paying par ticular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine.
- Use this manual as a guide. Your machine will remain a reliable working tool provided it is kept in good working condition and serviced properly. The standard attachments and equipment available for use with this machine are intended for general earth moving purposes, material rehandling, etc.
- If the machine is to be used for handling loads, (tubing, concrete pipe sections, shoring material, etc.), make sure the machine is suitably equipped for this type of work. For this type of application, the machine must be equipped with safety valves, an overload indicator, a load handling chart corresponding to the type of machine and its attachment and a load fixing point. All legal requirements must also be strictly observed.
TABLE OF CONTENTS:
CASE CX330 EXCAVATOR Operator’s Manual
TO THE OWNER 1
CX330 EXCAVATOR 1
RIGHT,LEFT,FRONT AND REAR OF THE MACHINE 3
IDENTIFICATION NUMBERS 5
TYPE, SERIAL NUMBER AND YEAR OF MANUFACTURE 5
MACHINE COMPONENTS 6
SAFETY/DECALS/HAND SIGNALS 7
SAFETY RULES 7
PERSONAL SAFETY 8
SAFETY AREA 8
UTILITY SAFETY 9
OPERATOR PRECAUTIONS 10
DECALS 20
HAND SIGNALS 29
INSTRUMENTS/CONTROLS 33
CAB DOOR 33
STEPS AND ACCESS HANDLES 34
FUNCTION CANCELLATION LEVER AND SAFETY BAR 35
OPERATOR’S COMPARTMENT CONTROLS 36
LOCATION OF CONTROLS AND ASSOCIATED COMPONENTS 36
RIGHT-HAND CONTROL ARM 39
LEFT-HAND CONTROL ARM 40
SYSTEMS DISPLAY AND CONTROL PANEL42
ANTI-THEFT DEVICE 51
ARM AND UPPER STRUCTURE SWING CONTROL 54
LEFT-HAND CONTROL LEVER 54
BOOM AND BUCKET CONTROL 55
RIGHT-HAND CONTROL LEVER 55
OPTIONAL CONTROL PATTERN 56
ARM AND UPPER STRUCTURE SWING LEFT-HAND CONTROL LEVER 56
OPTIONAL CONTROL PATTERN 57
BOOM AND BUCKET RIGHT-HAND CONTROL LEVER 57
TRAVEL CONTROL LEVERS AND PEDALS 58
AUTOMATIC TEMPERATURE CONTROL SYSTEM 62
OPERATOR’S SEAT 67
WINDSHIELD 71
LOWER FRONT WINDOW 73
REAR WINDOW AND EMERGENCY EXIT 74
ENGINE HOOD 78
LOWER PANELS 80
WINDSHIELD WASHER RESERVOIR 80
LOAD LIFTING EYE 81
TOWING HOLES 82
OPERATING INSTRUCTIONS 85
BEFORE OPERATING THE MACHINE 85
MACHINE OPERATION 86
BREAK-IN PERIOD 89
ANTI- VANDAL GUARD 90
STARTING THE ENGINE 92
BRINGING THE MACHINE UP TO OPERATING TEMPERATURE 94
ENGINE OPERATION95
OPERATING THE MACHINE IN COLD WEATHER 96
OPERATING THE MACHINE IN HOT WEATHER96
STOPPING THE ENGINE97
MACHINE TRAVEL 98
LIFTING LOADS WITH THE MACHINE 101
LIFTING THE MACHINE103
OPERATING THE MACHINE IN WATER 104
OPERATING THE MACHINE ON SLOPING GROUND104
OPERATING THE BUCKET 105
PARKING THE MACHINE 106
AUXILIARY HYDRAULIC (OPTIONAL) 109
TRANSPORTING THE MACHINE 112
LUBRICATION 117
FLUIDS AND LUBRICANTS 117
HOURMETER 118
DAILY INSPECTION 118
INTERVALS 120
ENGINE OIL 122
OIL VISCOSITY/OIL RANGE 123
FLUID AND LUBRICANT CAPACITIES AND SPECIFICATIONS 125
HYDRAULIC FLUID CHART 126
GREASE POINTS 127
GREASING THE TURNTABLE TEETH 131
GREASING THE SWING REDUCTION GEAR 131
FLUID LEVELS 132
ENGINE 133
COOLING SYSTEM 135
FUEL SYSTEM 137
RELEASING PRESSURE IN THE HYDRAULIC SYSTEM 139
HYDRAULIC SYSTEM 140
RESERVOIR BREATHER REPLACEMENT 147
BLEEDING AIR FROM THE HYDRAULIC COMPONENTS 149
AIR FILTER 152
SERVICE SPECIFICATIONS 152
SWING REDUCTION GEAR 155
TRAVEL REDUCTION GEARS 157
ADJUSTMENT/MAINTENANCE 159
TRACKS 159
TRACK SHOE BOLT TORQUE 162
TRACK ROLLERS AND IDLER WHEELS 162
RADIATOR AND OIL COOLER 163
FAN AND ALTERNATOR DRIVE BELT 164
FUEL TANK FILTER 165
INSPECTING AND CLEANING THE MACHINE 165
CHECKING FOR CYLINDER LEAKAGE 166
PLASTIC AND RESIN PARTS 166
REPLACING A BUCKET 167
WELDING ON THE MACHINE 169
FIRE EXTINGUISHER (OPTIONAL)169
AIR CONDITIONING 170
HARDWARE TORQUE INSPECTION 173
TORQUE SPECIFICATIONS PER COMPONENT 174
ELECTRICAL 175
BATTERIES 177
CONNECTING BOOSTER BATTERIES 179
REPLACING A BULB 180
MACHINE STORAGE 183
SPECIFICATIONS 187
ENGINE 187
HYDRAULIC SYSTEM 188
WEIGHTS 189
ESCO BUCKETS 191
DIMENSIONS 192
WORKING RANGE 198
LIFTING CAPACITIES 200
INDEX 205
FILE FORMAT:
LANGUAGE:ENGLISH
PAGES:214
DOWNLOADABLE:YES
FILE TYPE:PDF
PLEASE NOTE:
- This is the SAME exact manual used by your dealers to fix your vehicle.
- The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
- Any queries / doubts regarding your purchase, please feel free to contact [email protected]
