CASE 580N 5805N 580SN WT 59OSN Tier 4 Tractor Loader Backhoe Operator’s Manual
SCREENSHOT OF THE MANUAL:
TABLE OF CONTENTS:
- CASE 580N 5805N 580SN WT 59OSN Tier 4 Tractor Loader Backhoe Operator’s Manual
- Publication Number:47492940
1 GENERAL INFORMATION
Intended use 1-1
CNH America LLC technical manuals 1-1
Electro-Magnetic Compatibility (EMC) 1-2
Note to the owner 1-2
Read the Operator’s Manual 1-3
Manual storage 1-3
Product Identification Number (PIN) 1-4
Component Identification 1-7
Right, left, front and rear of the machine 1-8
2 SAFETY INFORMATION
Safety rules 2-1
Safety rules – California Proposition 65 Warning 2-2
Safety rules – General 2-3
Safety rules – Air conditioning system 2-3
Safety rules – Basic operating 2-4
Safety rules – Battery 2-5
Safety rules – Electrical storm safety 2-6
Safety rules – Fire or explosion prevention 2-6
Safety rules – Fuel handling precautions 2-7
Safety rules – Hazardous chemicals 2-7
Safety rules – Lifting and overhead loads 2-7
Safety rules – Maintenance precautions 2-8
Safety rules – Mounting and dismounting 2-9
Safety rules – Operator precautions 2-9
Safety rules – Specific precautions to this machine 2-10
Safety rules – Transporting precautions 2-10
Safety rules – Utility precautions 2-11
Safety rules – Wheels and tires 2-12
Safety rules – Ductile iron 2-12
Safety rules – Roll Over Protective Structure (ROPS) 2-13
Safety rules – Seat belt 2-14
Safety signs 2-15
Hand signals 2-37
Do Not Operate hang tag 2-41
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Machine access 3-1
OPERATOR’S SEAT
Operator seat 3-2
FORWARD CONTROLS
Front console – Left-hand switch panel 3-6
Front console – Right-hand switch panel 3-8
Steering column 3-9
Gear selector 3-11
Pedal controls 3-13
RIGHT-HAND SIDE CONTROLS
Loader functions 3-14
Console controls 3-18
Heating, ventilation or air-conditioning control 3-22
Advanced instrument cluster (AIC) 3-27
Menu screen display 3-31
REARWARD CONTROLS
Console controls 3-36
Backhoe controls – Mechanical 3-39
Backhoe controls – Pilot 3-44
OVERHEAD CONTROLS
Dome light 3-50
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Run in period of a new machine 4-1
Engine speed 4-1
STARTING THE UNIT
Before starting the engine 4-2
Normal engine starting 4-3
Cold temperature operation 4-4
Hot temperature operation 4-6
Booster battery procedure 4-7
STOPPING THE UNIT
Shutting down the engine 4-9
MOVING THE UNIT
Before operating the machine 4-10
Uniform braking 4-11
Transmission gears 4-12
Machine direction 4-14
Traveling on a hill 4-14
Differential lock system 4-14
Ride control (2WD machines only) 4-15
Auto Ride Control (ARC) 4-16
5 TRANSPORT OPERATIONS
RECOVERY TRANSPORT
Towing the machine 5-1
Transporting on a trailer 5-3
6 WORKING OPERATIONS
GENERAL INFORMATION
FNR shift sensitivity 6-1
Display brightness 6-2
Maximum throttle/Cold start idle 6-3
Brake enabled idle 6-5
Throttle sensitivity 6-7
Regeneration inhibit 6-8
Oil life reset 6-10
Auto ride control speed thresholds 6-11
LOADER OPERATIONS
Personal safety 6-12
Job layout 6-13
Comfort Steer 6-14
Detent position for 4 in 1 bucket control switch 6-15
Loader digging force 6-18
Bucket level, position and depth indicators 6-20
Return to dig 6-22
Lifting with the loader 6-24
Changing loader attachments 6-24
BACKHOE OPERATIONS
Personal safety 6-27
Basic instructions 6-27
Backhoe danger area 6-28
Swing lock 6-29
Extendahoe lock 6-29
Stabilizer pads 6-30
Backhoe transport position 6-32
Before operating the backhoe 6-34
Filling the backhoe bucket 6-36
PowerLift 6-37
Moving the machine while digging 6-38
Lifting with the backhoe 6-39
Changing backhoe attachments 6-41
7 MAINTENANCE
GENERAL INFORMATION
Safety rules 7-1
General safety before you service 7-2
Hour meter 7-2
Support strut for loader lift arm 7-3
Hood latch 7-5
Fire extinguisher 7-6
Welding on the machine 7-7
Battery access and care 7-9
Capacities 7-11
Consumables 7-13
Fuses and relays 7-15
Definition fuse, relay and diode icon definitions 7-20
Diagnostic/service tool port — Diagnostic service tool port 7-27
Hydraulic diagnostic test ports 7-28
Heater coolant shutoff valve 7-29
MAINTENANCE CHART
Maintenance Chart 7-30
At warning message display
Engine air filters 7-32
Hydraulic filter(s) 7-34
Fuel system water separator 7-35
Diesel Particular Filter (DPF) Regeneration – Auto 7-37
Diesel Particular Filter (DPF) Regeneration – Forced 7-38
Initial 10 hours
Air conditioning belt 7-41
Wheel nut and bolt torque 7-42
Every 10 hours or daily
Engine oil level 7-43
Loader, backhoe, Extendahoe grease fittings 7-45
Initial 20 hours
Transmission fluid level 7-54
Front axle fluid level – Four wheel drive 7-55
Rear axle fluid level 7-56
Every 50 hours
Fuel system water separator 7-57
Coolant reservoir (deaeration reservoir) fluid level 7-59
Hydraulic reservoir fluid level 7-60
Front axle grease fittings 7-61
Loader hydraulic coupler lock pins 7-62
4 in 1 bucket pivots and grease fittings 7-62
Initial 100 hours
Hydraulic filter(s) 7-64
Transmission filter 7-66
Fuel filters 7-68
Service brakes 7-70
Parking brake 7-71
Every 100 hours
Backhoe swing control 7-72
Extendahoe control 7-72
Every 250 hours
Battery 7-73
Air conditioning belt 7-74
Front axle fluid level – Four wheel drive 7-75
Front axle breather 7-76
Front axle drive shaft 7-76
Rear axle fluid level 7-77
Rear axle breather 7-77
Rear axle drive shaft 7-77
Fuel tank 7-78
Transmission fluid level 7-79
Air conditioning compressor seals 7-80
Every 500 hours
ROPS cab and seat mount 7-81
Operator’s seat 7-83
Fuel filters 7-84
Engine oil and filter 7-86
Battery fluid level 7-87
Every 1000 hours
Hydraulic fluid and filter(s) 7-88
Hydraulic reservoir breather 7-90
Cab intake filter 7-91
Front axle fluid 7-92
Rear axle fluid 7-94
Transmission fluid and filter 7-95
Engine air filters 7-97
Parking brake 7-99
Every 2000 hours
Cooling system 7-100
Every 3000 hours
Diesel particulate filter (DPF) 7-103
Every 4000 hours
Crankcase ventilation filter 7-103
As required
Swing cylinder area 7-104
Bleed air from the fuel system 7-105
Tire pressure 7-107
Operator’s seat 7-108
Grille screen and radiator area 7-110
Fan belt 7-111
Ride control accumulator 7-113
Pilot control accumulator 7-113
Disable parking brake 7-114
Auxiliary hydraulic pressure and flow 7-116
ELECTRICAL SYSTEM
Stop, tail, flasher and turn signal lamps – Cab 7-118
Stop, tail, flasher and turn signal lamps – ROPS canopy 7-121
Driving and flood lamps 7-123
Dome lamp 7-126
8 TROUBLESHOOTING
ALARM(S)
Seat switch alarm 8-1
9 SPECIFICATIONS
Engine 9-1
Powertrain 9-3
Hydraulics 9-5
Travel speeds 9-6
Machine overall dimensions 9-9
Loader lift capacities 9-15
Backhoe/extendahoe lift capacities 9-15
Noise levels 9-25
Torque 9-26
General specification – Biodiesel fuels – Biodiesel fuels 9-28
10 ACCESSORIES
General accessories 10-1
Telematics – Overview with Case SiteWatch™ 10-3
VIDEO PREVIEW:
DESCRIPTION:
This loader backhoe, with standard equipment and authorized attachments, is intended for general earth moving purposes, handling, ditch digging, etc. Use only approved accessories and attachments designed for your machine. This Operator’s Manual does not include instructions for attachments. Read the manual(s) provided with the authorized attachment to learn safe maintenance and operation of the machine. Make sure the machine is suitably equipped for the type of work to be performed. Your Case Dealer is available for any further information. They will also provide any after-sales service you may need, and genuine Case spare parts, your guarantee of quality and match. Case Construction customer assistance is also available.
PLEASE NOTE:
⦁ This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
⦁ You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
⦁ Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted
