Bomag BW 213 DH-3 BW 213 PDH-3 BW 213 PDBH-3 Single drum roller Operating instructions Manual 00814011 – PDF DOWNLOAD

Technical Data 9

Safety regulations 15

Indicators and Controls 23
3.1 General notes 24
3.2 Description of indicators and control elements 24
2SHUDWLRQ 
4.1 General notes 34
4.2 Tests before starting to operate 34
4.3 Starting the engine 35
4.4 Starting with jump leads 37
4.5 Driving the machine 38
4.6 Emergency exit 40
4.7 Operating the parking brake, stopping the machine 40
4.8 Shutting the engine down 41
4.9 Switching the vibration on and off 42
4.10 Adjusting the steering wheel 43
4.11 Adjusting the seat 44
4.12 Operating the Dozer Blade (BW 213 PDBH-3) 44
4.13 Moving the hood to maintenance position/closing the hood. 45
4.14 Towing the machine in case of an engine failure 46
4.15 Transport 47
0DLQWHQDQFH 
5.1 General notes on maintenance 50
5.2 Fuels and lubricants 51
5.3 Table of fuels and lubricants 54
5.4 Running-in instructions 55
5.5 Maintenance chart 56
5.6 Checking the engine oil level 58
5.7 Checking, cleaning the water separator 58
5.8 Checking the fuel level 59
5.9 Checking the hydraulic oil level 60
5.10 Checking the coolant level 60
5.11 Checking the V-belt 61
5.12 Checking the dust separator on the oil bath air filter 61
5.13 Checking the tire pressure 62
5.14 Adjusting the scrapers 62
5.15 Grease the dozer blade (BW 213 PDBH-3) 63
5.16 Changing engine oil and oil filter cartridge 64
5.17 Cleaning the cooling fins on radiator and hydraulic oil cooler 66
5.18 Checking the oil level in the axle 67
5.19 Checking the oil level in the axle reduction gear 67
Table of Contents
8 %20$* BW 213 DH-3 / PDH-3
5.20 Checking the oil level in the planetary drives 68
5.21 Checking the oil level in the vibration bearing housings 68
5.22 Checking the oil level in the axle reduction gear 69
5.23 Servicing the battery 70
5.24 Draining the fuel tank sludge 70
5.25 Changing the fuel filter cartridges 71
5.26 Checking V-belt tension, idler pulley and blower hub 72
5.27 Changing the oil in the drive axle 74
5.28 Changing the oil in the planetary drive 74
5.29 Changing the oil in the axle reduction gear 75
5.30 Changing the oil in the drum drive reduction gear 76
5.31 Changing the the oil for the vibration bearings 77
5.32 Checking the fastening elements on the engine 78
5.33 Tightening the fastening of the axle to the frame 78
5.34 Tightening the wheel nuts 79
5.35 Checking the ROPS 79
5.36 Cleaning the oil bath air filter 80
5.37 Checking, adjusting the valve clearance 81
5.38 Changing the hydraulic oil and the breather filter 83
5.39 Changing the hydraulic oil filter 84
5.40 Changing the coolant 85
5.41 Cleaning, changing the dry air filter cartridge 87
5.42 Adjusting the parking brake 89
5.43 Bleeding the fuel system 90
5.44 Changing the tires 91
5.45 Changing the fresh air filter in the cabin 92
5.46 Tightening torques 92
5.47 Engine conservation 93
6.1 General notes 96
6.2 Engine 97